front lip spoiler
#1
Advanced
Thread Starter
Join Date: Jan 2003
Location: Jackson, MS USA
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Anyhone gotten a new GT3 front lip spoiler from a dealer in the US at a decent price? I haven't even asked my dealer, as I'm sure **** rape is imminent. I want OEM, not the larger Cup piece--mine kisses the ground enough as it is.
Dan Blumenthal
Dan Blumenthal
#4
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I had the unfortunate need to replace mine a few weeks ago. My local dealer was actually cheaper than the out of state dealers I contacted. It was about $179, and they installed it for free.
#5
Advanced
Thread Starter
Join Date: Jan 2003
Location: Jackson, MS USA
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Ok, I just located one at Bert Smith Porsche in Tampa for $156.89. This is way less than my local dealer that wanted $282.40 and GMG who wanted $230.
Dan
Dan
#7
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
How easily does the front splitter come off?
I scrape everytime I load my car on the trailer ramp and need to use boards to get my height up.
Or, is it too much work to do it each time???????
.
I scrape everytime I load my car on the trailer ramp and need to use boards to get my height up.
Or, is it too much work to do it each time???????
.
Trending Topics
#8
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I m using the FVD's Cup spoiler with air duct, cost me like SGD 250 or USD 180
It's lower by bout one inch but the car feels more stable at high speed coz the lip extends on both side of the bumper.
It's lower by bout one inch but the car feels more stable at high speed coz the lip extends on both side of the bumper.
#10
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have the cup front spoiler. The stock one has 2 screws on the lateral margins. Once removed, the spoiler pulls right off. The cup spoiler has similar tabs w/o screws and slides right into place. The whole process of removal and replacement takes 5 minutes.
#12
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I just put the front spoiler on this past weekend and have taken the car out twice since. The last time was to get the Sharkwerks bypass installed. I'll report on that later. Anyway, I slightly scraped entering a driveway (not my own). The spoiler is certainly lower and scraping is inevitable. If you are careful in the right places, I think you won't have many problems. I don't think you can go wrong at about $150 each and given the ease of install. Plus it looks much more aggressive the the stock piece.
#13
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Did you get the one with brake ducts or w/o brake ducts? I understand they come both ways.
#14
#15
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
so cup lip is held in place by friction only?