GT3 dropped off at Farnbacher
#16
"my guess is that you will be at least 2 seconds faster (maybe more) on Hoosiers at Limerock"
You would be at least 2 seconds faster.
My experience has found that the MPSC's are faster than the Corsa's. So a 1 min lap with those 19' Corsa's on would be a real burner! You would be flying with the R6's.
You would be at least 2 seconds faster.
My experience has found that the MPSC's are faster than the Corsa's. So a 1 min lap with those 19' Corsa's on would be a real burner! You would be flying with the R6's.
#17
Best price I've heard - I paid $2,200 plus install / paint etc.... I was just commenting the first bars sold for $3,000 when we had a supply & demand issue. Now the supply chain is better and prices are / were dropping. Now we have the Euro vs. Dollar issue.
Finally, we have Porsche issues - they always price accordingly to get into our pockets as much as possible.
#18
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Mar 2004
Location: USA
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
No video but now I have a mount with the roll bar for the future. If you want a Lime Rock video, I do have several from a Skip Barber Formula car, the line is surprisingly similar. Just need help trying to upload....
#19
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Mar 2004
Location: USA
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
Not an instructor but some friends will be at this event. I am not good shotgun, I even get sick playing video games. But for sure I will take you in my car. RED GT3 with the plate "AQUIKY"
#20
Three Wheelin'
Best price I've heard - I paid $2,200 plus install / paint etc.... I was just commenting the first bars sold for $3,000 when we had a supply & demand issue. Now the supply chain is better and prices are / were dropping. Now we have the Euro vs. Dollar issue.
Finally, we have Porsche issues - they always price accordingly to get into our pockets as much as possible.
Finally, we have Porsche issues - they always price accordingly to get into our pockets as much as possible.
yeah, the prices are rediculous wrt demand....paid ~500 for the powder coating and did the install myself with the P-tech( gotta lube those tubes or risk scratching the whole thing up).....actually quite simple to install but it is a two man job....oh, and i had to make my own mounting plates...originally I thought I had them but was wrong....still, it came out way cool....Peter just had to pay the Farn-B Vig....it comes with the quality he recieved...I am sure it came out perfect.
#21
Three Wheelin'
I dropped my GT3 off to get a roll bar, 996 race seat and harness installed Thursday and will get it back Monday. They are also doing a track alignment to get away from the stock understeer issue.
Did a track day at Lime Rock earlier in the week and I was surprised how well the bone stock car ran. Did a bit of short shifting since the miles are still under 1,000 but even with that and crappy Pirellis she did 1:00.5's all afternoon. Just did not fell very safe with a push and no harness or roll bar in the downhill.
Fikse's and slicks are on order too
Did a track day at Lime Rock earlier in the week and I was surprised how well the bone stock car ran. Did a bit of short shifting since the miles are still under 1,000 but even with that and crappy Pirellis she did 1:00.5's all afternoon. Just did not fell very safe with a push and no harness or roll bar in the downhill.
Fikse's and slicks are on order too
Can def. see you popping a 58/57 with your intended new set-up...what slicks are you planning on? and which pads do you like for the Rock?...at a T&T we were doing nice and easy 57's (and not letting the hammer drop) on Dunlops and PFC's...
#22
thanks
the reason i asked if you were an instructor is that it looks like you may have to be an instructor to take people for rides
if we can get around this, i will take a ride for sure
thanks
paul
#23
Rennlist Member
Lime Rock is my home track so I have tons of laps in here, fastest ever was in a Skippy car last year at 56.5 which became the track record. Fastest time for me in a Porsche was 58.8 in the Koni race this year.
I am looking forward to seeing how the GT3 runs with the new changes.
I am looking forward to seeing how the GT3 runs with the new changes.
You should be significantly faster in the GT3 than in a Koni car, as the Koni spec tires are terrible and engines are about 100HP down to a GT3. I would guess low 58s if you can really set up the suspension and run on Hoosiers.
Have fun and good luck!!!
#25
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Mar 2004
Location: USA
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
Shane qualified with a 58.081, what happen to him? He never showed up for the pre-grid so I inherited his P2 starting position. Was it car problems or did he not pass tech?
#26
Rennlist Member
When a mom and pop team like ours gets outside pole we get checked out pretty closely... they said we overrevved by a few hundred RPMs so we started from last. I think you guys won at the previous race and finished 2nd, awesome job. That was a pretty crazy race, I enjoyed it a lot and made the "crashes" clip at the end. Hope I can do more next year, I have to convince Greg at F-Loles to run a car...
Last edited by analogmike; 10-04-2007 at 01:09 PM.
#27
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Mar 2004
Location: USA
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
Finally got around to the promised photos. First shot is alway before followed by a shot after. Before anyone asks, I only install 1 seat until my youngest is big enough to disregard th baby-smart airbags for our "fun rides".
#28
Burning Brakes
Join Date: Aug 2005
Location: Cambridge, MA
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
looks nice. per schroth installation instructions, the shoulder belts should be crossed when they are this far back. see page 22-23.
http://www.hmsmotorsport.com/docs/Co...structions.pdf
http://www.hmsmotorsport.com/docs/Co...structions.pdf
#29
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Mar 2004
Location: USA
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
looks nice. per schroth installation instructions, the shoulder belts should be crossed when they are this far back. see page 22-23.
http://www.hmsmotorsport.com/docs/Co...structions.pdf
http://www.hmsmotorsport.com/docs/Co...structions.pdf