The coolest wheels for a 997.
#34
Burning Brakes
Great. Another excuse to post pics
Champion RS98 Wheels.
Champion RS98 Wheels.
#35
OZ Ultraleggera in black or bronze. I have black. Badass. Those Outlaw Singer style are pretty wicked but that's a way different look.
#36
Rennlist Member
Originally Posted by mickfluff
Yes and no. Great choice in wheel no doubt but believe on a base 997 The car looks like it needs more. Such wheels imo look best on modded car with some aero adds or factory aero car.
#40
RL Community Team
Rennlist Member
Rennlist Member
I have polished Champion RS171s and ADV1 - ADV05 in brushed with clear.
The following 3 users liked this post by Petza914:
#41
Rennlist Member
I really like the GT3 997.2 wheels as well as the champion wheels. I also like a lot of the split 5 spoke wheels, but so many of them at the $1000-1200 price point are made in asia and I have had bad luck regarding bends on those wheels in the past. Here is what I ended up with. Sort of a GT3 997.2 and Champion hybrid (the center cap does come off and is made to run that way as well, with a slightly differnt "look", more like the Champion wheels. If you look really close you can see my Lobsters in the car. LOL. OZ with 15/7mm spacers
The following 2 users liked this post by rodH:
ABNJOE (05-30-2021),
Baddxample (06-27-2023)
#42
Rennlist Member
Pete, what springs are you running. I didn't think I needed to lower my car, then I went to Cars and Coffee and see all the GT3s there and makes my car look like a 4x4. The front looks fine to me, but the rear needs to go down .4-5". Anyone know what springs would do that? (seems like maybe Eibachs?). I do NOT want a slammed look.
#43
Rennlist Member
I really like the GT3 997.2 wheels as well as the champion wheels. I also like a lot of the split 5 spoke wheels, but so many of them at the $1000-1200 price point are made in asia and I have had bad luck regarding bends on those wheels in the past. Here is what I ended up with. Sort of a GT3 997.2 and Champion hybrid (the center cap does come off and is made to run that way as well, with a slightly differnt "look", more like the Champion wheels. If you look really close you can see my Lobsters in the car. LOL. OZ with 15/7mm spacers
#44
RL Community Team
Rennlist Member
Rennlist Member
Pete, what springs are you running. I didn't think I needed to lower my car, then I went to Cars and Coffee and see all the GT3s there and makes my car look like a 4x4. The front looks fine to me, but the rear needs to go down .4-5". Anyone know what springs would do that? (seems like maybe Eibachs?). I do NOT want a slammed look.
Last edited by Petza914; 02-10-2016 at 09:36 AM.