5 minute grill guards for $5
#31
I just finished mine this past weekend
Here are a few photos of the ones I did this weekend. I used the gutter material from Home Depot. I also cut and installed the center piece. These are on a 997s and I found it extremely helpful to use small hook tools during installation
#32
Rennlist Member
Raining out so I did mine today with gutter guard from Menards $2.49 . I had to vacuum out first as there were leaves in there even though Icleaned it out last spring.
Last edited by Bomar Shelby; 05-20-2018 at 04:48 PM. Reason: correction
#35
Rennlist Member
Wayne,
Very nice DIY.
Great minds think alike. I did the exact same thing yesterday and took pics about an hour ago. I cut a template from a legal size folder. I also left the horizontal and vertical slats in place as I wanted to retain the stock look, but also wanted to install the grills behinf the slats.
Below are my pics. I am not trying to hijack your thread, just adding to it.
Very nice DIY.
Great minds think alike. I did the exact same thing yesterday and took pics about an hour ago. I cut a template from a legal size folder. I also left the horizontal and vertical slats in place as I wanted to retain the stock look, but also wanted to install the grills behinf the slats.
Below are my pics. I am not trying to hijack your thread, just adding to it.
Last edited by Chris M.; 11-12-2019 at 11:59 AM.