mrzoop

I've been in the market for a 997 recently. I've seen a mixture of 05, 06 and 07's. On 05 and 06 cars I noticed a black plastic lip that's about 1" high by the width of the car. It's located about 18" to the rear and between the front wheels. On both of the 07 cars I've seen, this lip was not attached. Do you think this was eliminated in the 07 model year or have both of the cars I saw had a meeting with a curb? Can somebody take a peek under their 07 and let me know if it's actually there?

LlBr

Is that it? This is a 997.1. Not sure of the mfgr date.

larrytrk

probably got knocked off, it's just pressed in a groove and very springy rubber.

Edgy01

Many drivers knock these off in short order. They are a vital part of the air flow of these cars. I actually have a spare because I found it in a parking lot where a lot of doctors park. I protected mine from being dislodged by adding a protective piece.

mrzoop

hey guy's - yup, that's it. but do we think it's actually there after '06 model year?

p-cardriver

It is on my 2007 997S C2

WJuser

i see on edgy's photo a really nice protection/skid infront of the OEM lip...what is the source for this bumper saver?

Edgy01

I got that from Performance Products. https://rennlist.com/forums/997-foru...-for-997s.html

MUSSBERGER

I have one that I never installed.

socalsteve

Its on my 2007 C2 Coupe...MFG date is late 06

MUSSBERGER

On my 05' relic.

Da Hapa

Can I ask a stupid question? I've never actually looked under my car but is that hole just ahead of the passenger side front tire supposed to be there or is there supposed to be something filling that area?

LlBr

I may be there for the horn sound to pass thru. Not kidding. Gotta go check it out and see.

Edgy01

That hole is normal.

Da Hapa

Thanks. I actually just checked under mine and saw that hole. Now I feel better.