pse fix pics
#16
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Been surching posts most of the day and didn't find a part number.
Guess I'll take the picture to the collection down the street. There my closest Porsche dealer. There not to friendly when your not buying a new Ferrari - let alone trying to find a $10 part.
Guess I'll take the picture to the collection down the street. There my closest Porsche dealer. There not to friendly when your not buying a new Ferrari - let alone trying to find a $10 part.
#17
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
http://e-partssales.com/Merchant2/merchant.mvc?
#18
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I would not disconnect any vacuum tubing.
You get the same result (PSE on all the time) by just unplugging
the 12 volt power connection to the solenoid valve ( the orange plug )
It takes just a few seconds , you don't have to buy anything and
no worries about possible leaking vacuum tubing which will give you a CEL or worse.
You get the same result (PSE on all the time) by just unplugging
the 12 volt power connection to the solenoid valve ( the orange plug )
It takes just a few seconds , you don't have to buy anything and
no worries about possible leaking vacuum tubing which will give you a CEL or worse.
Last edited by Rolf Stumberger; 11-22-2009 at 05:12 PM.
#19
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Rolf is correct, it's takes 2 seconds to disconnect the orange plug and you get a deeper sound than using the PSE on function.
#20
Rennlist Member
#21
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
All methods will work.
I had an 05 which the PSE was installed later. I didn't install the switch, so I just manually connect/disconnect the tubes to turn on and off. Worked fine. Now I have an 06 with PSE already came with the car. I either disconnect the swtich or tubes and plug the tubes. No problem at all.
So, do whatever you like.
I had an 05 which the PSE was installed later. I didn't install the switch, so I just manually connect/disconnect the tubes to turn on and off. Worked fine. Now I have an 06 with PSE already came with the car. I either disconnect the swtich or tubes and plug the tubes. No problem at all.
So, do whatever you like.
#22
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Can anybody assist with which vacum hose and location the vacum valve is spliced into. It's the first pictures of this post #1 and #2. Is it the T connector going into the switch with the orange connector?? as in post #18
I bought the air check valve (p/n 96411095001) and hose piece (99923904040)
Thanks
Eric
I bought the air check valve (p/n 96411095001) and hose piece (99923904040)
Thanks
Eric