Notices
997 Forum 2005-2012
Sponsored by:
Sponsored by:

Finally got to install this Function 1st Knob

Thread Tools
 
Search this Thread
 
Old 01-30-2023 | 06:28 PM
  #1  
thunder911's Avatar
thunder911
Thread Starter
Instructor
 
Joined: Nov 2020
Posts: 244
Likes: 24
From: So Cal
Default Finally got to install this Function 1st ****

It was sitting too long in my garage, so I installed in this past weekend. Looks cool, feels cool for now (probably hot in the summer), good size to the hand. Install is fairly easy, except to position the shift pattern just "right" if you are OCD like me. Wish it was a little cheaper - LOL.

Now, on to the steering wheel swap...nvr stops...


Function First Silver Finish with Red Shift Pattern.

The following users liked this post:
C2-996 (02-02-2023)
Old 01-30-2023 | 07:30 PM
  #2  
groovzilla's Avatar
groovzilla
Rennlist Member
 
Joined: Oct 2007
Posts: 17,709
Likes: 5,053
From: seattle, washington
Default

Do you have a short shift kit installed?


Old 01-30-2023 | 08:19 PM
  #3  
thunder911's Avatar
thunder911
Thread Starter
Instructor
 
Joined: Nov 2020
Posts: 244
Likes: 24
From: So Cal
Default

Nah, thing is...I was actually waiting to install the Numeric short shift kit, but then I decided to wait to swap the cables as well to Numeric if I was going to do the whole surgery, but then it was taking too long for me to pull the trigger so I installed this pretty **** first. Truth be told, I replaced the pass air-bag light last year or so (I put up a post I think), thus I really don't want to take the center console off all over again this soon. Getting old man, and our cars drive pretty good as is. Haha.
Old 01-30-2023 | 08:29 PM
  #4  
groovzilla's Avatar
groovzilla
Rennlist Member
 
Joined: Oct 2007
Posts: 17,709
Likes: 5,053
From: seattle, washington
Default

^^Shift **** looks very nice.
I like my short shift kit and was just wondering if you had one. The shorter throw is much nicer.

Old 01-30-2023 | 08:32 PM
  #5  
thunder911's Avatar
thunder911
Thread Starter
Instructor
 
Joined: Nov 2020
Posts: 244
Likes: 24
From: So Cal
Default

Do you have the OEM SS Kit or Numeric?
Old 01-31-2023 | 07:41 AM
  #6  
Butzi 997's Avatar
Butzi 997
Instructor
 
Joined: Apr 2019
Posts: 203
Likes: 132
From: Louisville KY
Default

FWIW, no doubt Numeric makes a great product, but I'm happy with my FF cable ends and FF Shift Right setup. $445 in parts. I like their transmission inserts as well.
Old 01-31-2023 | 08:37 AM
  #7  
Petza914's Avatar
Petza914
RL Community Team
Rennlist Member
 
Joined: Oct 2007
Posts: 26,439
Likes: 6,853
From: Clemson, SC
Default

All I can see is Joe Pesci in Home Alone grabbing the front door **** LOL
Old 01-31-2023 | 09:57 AM
  #8  
frybear's Avatar
frybear
Pro
 
Joined: Apr 2021
Posts: 669
Likes: 215
From: Highland Park, IL
Default

I did the Numeric short shifter and yes, removing the center console definitely takes time. The hardest part for me was actually disconnecting the wiring harness! That sucker did not want to separate. I would love to do the shifter cables but my fear, since I won't do those myself, is that my mechanic will somehow damage the new leather console in the process of removing it...
Old 01-31-2023 | 01:28 PM
  #9  
groovzilla's Avatar
groovzilla
Rennlist Member
 
Joined: Oct 2007
Posts: 17,709
Likes: 5,053
From: seattle, washington
Default

Originally Posted by thunder911
Do you have the OEM SS Kit or Numeric?
I'm not sure which one because it was installed by previous owner.


Old 02-01-2023 | 01:59 PM
  #10  
dmpslc's Avatar
dmpslc
Racer
 
Joined: Sep 2005
Posts: 348
Likes: 289
From: Salt Lake City, UT
Default

Originally Posted by Petza914
All I can see is Joe Pesci in Home Alone grabbing the front door **** LOL
You aren't wrong - I have the same **** and it gets HOT in the summer in Utah. The first few minutes requires a light touch and AC vents pointing as down as you can make them! But it has a great feel so it's worth it. And now I have a shift pattern tattoo on my palm that I got for free!
The following users liked this post:
Petza914 (02-01-2023)
Old 02-01-2023 | 07:54 PM
  #11  
997.1C2S's Avatar
997.1C2S
Intermediate
 
Joined: May 2021
Posts: 43
Likes: 69
Default

I looked at the function first ***** but decided on an ixi gears **** (ixigears.com) found the selection, quality and prices very good!
Old 02-01-2023 | 11:40 PM
  #12  
thunder911's Avatar
thunder911
Thread Starter
Instructor
 
Joined: Nov 2020
Posts: 244
Likes: 24
From: So Cal
Default

[ ]
Old 02-01-2023 | 11:40 PM
  #13  
thunder911's Avatar
thunder911
Thread Starter
Instructor
 
Joined: Nov 2020
Posts: 244
Likes: 24
From: So Cal
Default

Originally Posted by frybear
I did the Numeric short shifter and yes, removing the center console definitely takes time. The hardest part for me was actually disconnecting the wiring harness! That sucker did not want to separate. I would love to do the shifter cables but my fear, since I won't do those myself, is that my mechanic will somehow damage the new leather console in the process of removing it...
I hear ya! I HATE it when an "upgrade" install damages something that is fine in the first place. Is Numeric worth it, even without the Numeric cables?
Old 02-01-2023 | 11:43 PM
  #14  
thunder911's Avatar
thunder911
Thread Starter
Instructor
 
Joined: Nov 2020
Posts: 244
Likes: 24
From: So Cal
Default

Originally Posted by Butzi 997
FWIW, no doubt Numeric makes a great product, but I'm happy with my FF cable ends and FF Shift Right setup. $445 in parts. I like their transmission inserts as well.
This is another great option... Did you install it yourself? The FF Shift Right is NOT a short shifter correct? Could you install the OEM short shift kit into the FF set up? Having used your set up do you feel the need to install a Numeric/Cable set up or are you happy as is? Sorry for all the questions, but trying to get a feel before pulling trigger.
THX!
Old 02-01-2023 | 11:45 PM
  #15  
thunder911's Avatar
thunder911
Thread Starter
Instructor
 
Joined: Nov 2020
Posts: 244
Likes: 24
From: So Cal
Default

Originally Posted by 997.1C2S
I looked at the function first ***** but decided on an ixi gears **** (ixigears.com) found the selection, quality and prices very good!
Dont' be shy...post a pic of.



Quick Reply: Finally got to install this Function 1st Knob



All times are GMT -3. The time now is 01:54 AM.