When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It appears that you can buy just the infrastructure and assemble the thing. I suspect you would add a tiny bit of sealant around the lens. BTW, the description denotes 2010-13 but when I used their site to check for fitment, it said it did fit my 2009... which it should.
Peace
Bruce in Philly (now Atlanta)
997-631-413-05
Last edited by Bruce In Philly; 11-29-2022 at 11:24 AM.
It appears that you can buy just the infrastructure and assemble the thing. I suspect you would add a tiny bit of sealant around the lens. BTW, the description denotes 2010-13 but when I used their site to check for fitment, it said it did fit my 2009... which it should.
Peace
Bruce in Philly (now Atlanta)
997-631-413-05
very interesting… I’m not sure I would trust myself to seal the light correctly. Then again, seems like the factory sealed lights aren't that great either.
FYI I have solid red replacements on order with Suncoast for my .1 that were suppose to be in November 4th after I ordered them in September. Well, they didn't come in and their answer was that the wiring for the lights was being built in Ukraine and Porsche is looking for an alternative supplier. I asked to just get the lens assembly as my low mileage car doesn't need new wiring and they didn't respond. So if the .2 lights are in the same boat it may be a while? Now it seems the free market is at work...... Good luck!
11-28-2022, 06:42 PM
