Hello everyone! I am looking at purchasing a 2009 997.2 C4S. Can anyone help clarify the sizing of the rear seats (i.e. - since the C4S is the widebody, is there any difference in the rear seat size vs. the narrow body models)?

I have owned two 997's previously, but both were base cars. This would be my first all wheel purchase! Thank you in advance for your help!

 

I have a C4S and (without measuring) I would think the wide body is just the bodywork being an inch and 3/4? wider and would not affect the rear seat size

 

https://www.sunsetporscheparts.com/oem-parts/porsche-seat-cushion-99752205111n11?c=Zz1ib2R5JnM9cmVhci1zZWF0LWNvbXBvbmVudHMmaT02OTMzMzYyNSZ yPTEmYT1wb3JzY2hlJm89OTExJnk9MjAxMSZ0PXNwZWVkc3RlciZlPTMtOGwtaDYtZ2Fz

https://www.gaudinporscheparts.com/oem-parts/porsche-seat-cushion-pad-99752157104?origin=pla&gclid=CjwKCAjw_o-HBhAsEiwANqYhp2RJ9V12N7g-Ng27uGIjIVmHIYbFuM4Gkt7ZZvHMZrfGcowTGeFh7hoCitcQAvD_BwE <- This might be better, this is for coupe, top link is for cab.

FWIW Per the chart on this part, it shows the rear seat cushion as being usable across the entire 997.2 coupe lineup

 

Only the rear fenders are 22mm larger on the C4S (44mm for the car)
The car body is the same, so the seats are the same.

 

Seats are the same. They may be slightly different between the coupes and cabs. The cabs have a velcro attached center section for some reason that the coupes don't and the rear seatbacks in the cabs are canted forward whereas the coupes are upright - this is to make space behind the rear seats for the cab top to fold down. I don't know if the seatbacks or any of the latching hardware are different because of this angle and rear wall difference though.