Introduction to this forum-first water cooled Porsche!
#16
Nordschleife Master
I actually agree with you a lot. My friend Fred and I were comparing his 993 C4S and my 997.2 C4S and just how close they compare-especially in the lines. When I was doing the paint correction I realized just how much the curves were so similar to the 993 I just sold. So far I can say the Ceramic coating is unbelievable. I did my research and followed typical guidelines which include: wash, iron decontaminate, clay bar, then paint correction (on a black car get ready to spend A LOT of time in this phase-I actually did a heavy cut compound and then a med-light polish), dilute IPA with new microfiber cloths, and then applied the Ceramic per manufacturing recommendations. 2'x2' area at a time and wait around 45-60 secs for it to "flash", then buff, buff, buff with new micro-fiber towels. Two younger guys that work at the local P dealer had both worked in detail for a few years. I fed them beer and pizza to help me with the Ceramic coat application as I was actually getting a bit burned out on the 40hrs of prep I had just done-all three of us about 3-5mins into the job were all blown away at the appearance of the coating and how shiny and how we all felt it left this nice solid coating all over it.
I used the Avalon King Amor Shield product which is a consumer grade product that is suppose to last a solid 1-2yrs. Hit me up if you have any questions on tools needed, etc. The main difference really is in the way it forms a bonding coat on the car that is more durable vs wax. I won't use wax ever again to be honest. You have to do it every 3-4 months!
I used the Avalon King Amor Shield product which is a consumer grade product that is suppose to last a solid 1-2yrs. Hit me up if you have any questions on tools needed, etc. The main difference really is in the way it forms a bonding coat on the car that is more durable vs wax. I won't use wax ever again to be honest. You have to do it every 3-4 months!
The following users liked this post:
jibmaster1 (10-04-2020)
#17
Welcome to the 997 club Jibmaster! Sounds like this Basalt black C4S hit the jack pot for a new owner. Your passion for cars, maintenance, and meticulous DIY projects will be a great fit in this crowd. Great to hear your insight coming from the air-cooled world and we can tell you just have a passion for Porsche, no matter which model. Enjoy in good health and look forward to hearing more stories and projects from ya on the forums.
The following users liked this post:
jibmaster1 (10-04-2020)
#18
Rennlist Member
Welcome! Beautiful spec. Sweet garage setup.
#19
Burning Brakes
Air to Water
I have been lucky enough to have 993 C4S - amazing vehicle, the sound, smell, feel, and specially the tuning-fork ping you get when you shut the doors.....the metal body was at it's best.
From the C4S I jumped to a 997 07 manual coupe Turbo.....Wow....one of the best all around money can buy and nothing can replace the mid-range boost that car can deliver.
Wanting to scale back a bit and go naturally aspirated, I searched earnestly for a 997.2 manual coupe as I thought it offers the last of the "analog" feel with modern AC, well done interior, and the lines of a classic. Throw in some decent horsepower, and the whole package is hard not to like. Also, although the prices seem to be holding and/or escalating, good cars can be purchased for 30-40% less than a comparable 993.........that is hard to get passed.
Good luck with the new-old one, and yes, all Porsches are special.
From the C4S I jumped to a 997 07 manual coupe Turbo.....Wow....one of the best all around money can buy and nothing can replace the mid-range boost that car can deliver.
Wanting to scale back a bit and go naturally aspirated, I searched earnestly for a 997.2 manual coupe as I thought it offers the last of the "analog" feel with modern AC, well done interior, and the lines of a classic. Throw in some decent horsepower, and the whole package is hard not to like. Also, although the prices seem to be holding and/or escalating, good cars can be purchased for 30-40% less than a comparable 993.........that is hard to get passed.
Good luck with the new-old one, and yes, all Porsches are special.
#20
Rennlist Member
Thread Starter
Hula-
I really dig your signature statement. So much truth in that!
I really dig your signature statement. So much truth in that!
Last edited by jibmaster1; 10-10-2020 at 02:43 PM. Reason: Misspelled
The following users liked this post:
Hula (10-10-2020)
#21
Welcome and congrats! Wow, the paint correction and your expertise and insight is appreciated! The 997 folks seem like the best group to be a part of.
I purchased my first Porsche 2010 c4s basalt beige 6 spd, just like yours a year ago... it’s a dream. Interesting viewpoints on the 993 to 997 transition..I really heavily considered a 993 and sometimes consider the “cool” factor of a 993 is something I may do in the future. For people who don’t know what it is, just looks like an old Porsche. The same people who see my 997.2 c4s think it’s a brand new $100k+ car! I’d rather fly under the radar a bit but think the performance diff between the two would be too great for me... not to mention the cost delta as well. Only other upgrade I could think of was 997tt but after driving one, wasn’t for me.
Look into dsc controller for a huge improvement in pasm suspension, as well as sharkwerks center bypass for a nice upgrade in sound.
I purchased my first Porsche 2010 c4s basalt beige 6 spd, just like yours a year ago... it’s a dream. Interesting viewpoints on the 993 to 997 transition..I really heavily considered a 993 and sometimes consider the “cool” factor of a 993 is something I may do in the future. For people who don’t know what it is, just looks like an old Porsche. The same people who see my 997.2 c4s think it’s a brand new $100k+ car! I’d rather fly under the radar a bit but think the performance diff between the two would be too great for me... not to mention the cost delta as well. Only other upgrade I could think of was 997tt but after driving one, wasn’t for me.
Look into dsc controller for a huge improvement in pasm suspension, as well as sharkwerks center bypass for a nice upgrade in sound.
The following users liked this post:
jibmaster1 (10-11-2020)