How to properly maintain convertible top
#1
How to properly maintain convertible top
I assume this applies to the boxsters and 996's also. Anyway, it's my last day of vacation and I have been planning on doing this a while. Not really tech savvy or especially motivated so this will be several posts as I work though it.
This service should be done every 2 years or 20K miles.
First problem is getting the correct lubricants.
I could not find them in the US, so I'm improvising after a lot of research.
Osixo Anti squeak 557 is a fluorinated lubricant?
This is the closest thing I could find
The krytox GPL, I found this
And for the control optitemp, I found it was a lithium grease so I got this
Ok. That's the first post. Now off to try to follow the instructions on the manual
This service should be done every 2 years or 20K miles.
First problem is getting the correct lubricants.
I could not find them in the US, so I'm improvising after a lot of research.
Osixo Anti squeak 557 is a fluorinated lubricant?
This is the closest thing I could find
The krytox GPL, I found this
And for the control optitemp, I found it was a lithium grease so I got this
Ok. That's the first post. Now off to try to follow the instructions on the manual
The following 2 users liked this post by dgjks6:
JustinCase (08-03-2019),
pbxtr!! (04-08-2023)
The following users liked this post:
Carreralicious (08-03-2019)
#4
And the conversation with my wife when she gets home and sees the top in the service position -
She asks - what are you doing
To which I reply - lubricating and maintaining the top
And she says - great, this is how we break things...
She asks - what are you doing
To which I reply - lubricating and maintaining the top
And she says - great, this is how we break things...
The following 4 users liked this post by dgjks6:
#5
Ok next step
Which took me forever to find and they are small plastic pieces already with a layer of grease on them
I could never find number 3
I think I found the piece but it had no grease on it. The krytox gpl is a grease and the other stuff is a clear liquid, but I thought I could feel some grease on one of the bars and I could not, so I skipped that one.
One more step to come
Which took me forever to find and they are small plastic pieces already with a layer of grease on them
I could never find number 3
I think I found the piece but it had no grease on it. The krytox gpl is a grease and the other stuff is a clear liquid, but I thought I could feel some grease on one of the bars and I could not, so I skipped that one.
One more step to come
The following users liked this post:
Carreralicious (08-03-2019)
The following 2 users liked this post by dgjks6:
boisenelson (08-03-2019),
Pbrad (09-23-2019)
Trending Topics
#9
To OP, I was just about to start a thread on what "alternative" lubricants people were using to do the routine maintenance and stumbled on this thread. Very much appreciated!!!
Now to order the lube and get it off my to-do list.
Now to order the lube and get it off my to-do list.
The following users liked this post:
ParkslopeDope (09-13-2020)
#11
Thanks for this post! The only thing I would add is that #3 item is simply the rubber seal that goes all the way around. Lithium grease applied and wipe down with a rag after to prevent it from staining the top and surrounding metal
The following 6 users liked this post by mjposner:
911desire (11-23-2022),
Beachproducer (04-23-2022),
CX750 (09-13-2020),
KennyT993 (09-13-2020),
Lruano17 (04-13-2023),
and 1 others liked this post.
#13
This is great. Thanks.
I do get this rubbing like noise when I close my top, passenger side. Totally quiet on opening. I did lube the hinges, suspect it’s the spindle bearing. Is the service position just half way to opening or closing? Sorry for the newbie question. Thx again.
I do get this rubbing like noise when I close my top, passenger side. Totally quiet on opening. I did lube the hinges, suspect it’s the spindle bearing. Is the service position just half way to opening or closing? Sorry for the newbie question. Thx again.
#15
Document name and number
I assume this applies to the boxsters and 996's also. Anyway, it's my last day of vacation and I have been planning on doing this a while. Not really tech savvy or especially motivated so this will be several posts as I work though it.
This service should be done every 2 years or 20K miles.
First problem is getting the correct lubricants.
Attachment 1307118
I could not find them in the US, so I'm improvising after a lot of research.
Osixo Anti squeak 557 is a fluorinated lubricant?
This is the closest thing I could find
Attachment 1307119
The krytox GPL, I found this
Attachment 1307120
Attachment 1307121
And for the control optitemp, I found it was a lithium grease so I got this
Attachment 1307122
Ok. That's the first post. Now off to try to follow the instructions on the manual
This service should be done every 2 years or 20K miles.
First problem is getting the correct lubricants.
Attachment 1307118
I could not find them in the US, so I'm improvising after a lot of research.
Osixo Anti squeak 557 is a fluorinated lubricant?
This is the closest thing I could find
Attachment 1307119
The krytox GPL, I found this
Attachment 1307120
Attachment 1307121
And for the control optitemp, I found it was a lithium grease so I got this
Attachment 1307122
Ok. That's the first post. Now off to try to follow the instructions on the manual