BC Forged KL12 | 19x9 + 19x12
#1
Racer
Thread Starter
997.2 | BC Forged KL12 | 19x9 + 19x12
The new wheels have arrived for my 997.2, BC Forged KL12 in brushed clear finish, I cannot wait to get them on the car! Check out the full build thread for more photos: https://rennlist.com/forums/997-foru...ty-photos.html
Last edited by preelude; 03-20-2019 at 05:26 PM.
The following 3 users liked this post by preelude:
#2
RL Community Team
Rennlist Member
Rennlist Member
Those are truly beautiful. Looking forward to the pics.
#3
Rennlist Member
Very nice. This is one wheel I am looking into for my 991. Make sure to post pics. Very nice looking.
#4
Racer
Thread Starter
Wheel Weight | BC Forged KL12 | F:19x9 R:19x12
Weighed the wheels today and here are the results:
Front: 19x9.0 ET43 - 20.9 lbs
Rear: 19x12.0 ET53 - 22.9 lbs
After weighing the wheels I went to a shop to have the tires mounted and balanced. I was just supposed to drop them off as it was late in the day, but the tech suggested I stick around to wait for the fronts and knocked them off just before close. The rears will be ready tomorrow..
The front wheels are now on the car and I am very happy with the results, I will post some photos tomorrow when the rear wheels are on. In the meantime, here is a little iPhone photo teaser:
Front: 19x9.0 ET43 - 20.9 lbs
Rear: 19x12.0 ET53 - 22.9 lbs
After weighing the wheels I went to a shop to have the tires mounted and balanced. I was just supposed to drop them off as it was late in the day, but the tech suggested I stick around to wait for the fronts and knocked them off just before close. The rears will be ready tomorrow..
The front wheels are now on the car and I am very happy with the results, I will post some photos tomorrow when the rear wheels are on. In the meantime, here is a little iPhone photo teaser:
The following users liked this post:
RDS928S (05-29-2023)
#5
Racer
Thread Starter
#7
Racer
Thread Starter
Trending Topics
#8
Racer
Thread Starter
Some garage pics, please don't mind the mess, we just moved in December and I haven't been able to get to the garage organization yet. The front will still get a 1/4" drop and the camber needs to be adjusted. I may also lower the rear just a tad, I have not been able to look at the car from further away yet so it is hard to say what will look good.
#11
Racer
Thread Starter
Pirelli Pzero (Porsche OEM part numbers) 235/35R19 and 295/30R19, the Pzero is the factory Porsche tire and I think it has a much wider contact patch than the PSS.
#12
Racer
Thread Starter
#13
Rennlist Member
Very aggressive look
#14
RL Community Team
Rennlist Member
Rennlist Member