When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
RSS 15mm spacers all around on EIBACH Pro Kit makes the car look how it should have from the factory IMO. I also have 305s in the rear FYI. I mainly felt 7mm in front wasn't enough when the car is lowered. 15mm seems solid when lowered.
Man that looks good. Maybe I'll hold off on swapping out the 15mm up front until after I lower. It definitely looks diffferent.
Here is a pic from behind the day I got it done.
Can was suuuper dirty from all the debris in the canyons.
I think it is not too aggressively out there but not so sunken...perfect until I can get wheels and try to cram more rubber under there.
Eibach Pro kit = not too aggressively low.
H&R kit = 15mm is even less of a big deal because the drop cambers in the wheels to the point where I am assuming adjustable drop links would be smart.
Remember I am running 305s in back, so if you have 295s, 15mm is definitely chill. With the tires up front, it is NBD IMO.
Thank you for the compliment though. I thought about what to do and how to do it for a looong time before deciding because I know it will be a bit until I can get proper wheels.