997.2 3.8 Engine Failure
#106
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
This may be way off, but I had a battery go low on me and I thought the engine was running without oil (sounded like hell). It was really just not running on all cylinders. With low voltage not all the coils work.
#107
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The OPs engine is shedding metal. That's bad. But it's clear that no one knows what is wrong with it and no one will know until a tech digs in. Why waste time on conjecture?
The following users liked this post:
Hueneme997 (08-19-2019)
#108
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Wasting time and money on conjecture/diagnostics is exactly why I would go right to teardown. Unless you were making the decision to fix or not further diagnostics won't help in my opinion and just cost more money. It's a beautiful car. No question whether to fix or not. I would go right to teardown if it was mine. Chances are like someone said earlier another tech will want to start it or take for a drive just causing further damage. I think OPs plan is a good one.
#109
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
well, best of luck on a low dollar ding getting her back up and running...
#112
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Its for sale if anyone wants it but i have also come to an agreement with Jake Raby at Flat Six Innovantions to do a rebuild so unless somebody buys it in the next day or two it will be off to Georgia. Waiting on them to arrange transportation.
Also fedex finally delivered my oil sample to blsckstone. I will post it later as im writing on my phone right now.
Also fedex finally delivered my oil sample to blsckstone. I will post it later as im writing on my phone right now.
#113
RL Community Team
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Its for sale if anyone wants it but i have also come to an agreement with Jake Raby at Flat Six Innovantions to do a rebuild so unless somebody buys it in the next day or two it will be off to Georgia. Waiting on them to arrange transportation.
Also fedex finally delivered my oil sample to blsckstone. I will post it later as im writing on my phone right now.
Also fedex finally delivered my oil sample to blsckstone. I will post it later as im writing on my phone right now.
Peace
Bruce in Philly
#114
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Nice.
Flat six rebuild 30-40k
You sir will have a hell of a nice car when done.
Good luck
Flat six rebuild 30-40k
You sir will have a hell of a nice car when done.
Good luck
#115
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
So it’s off for a five-figure rebuild without an official diagnosis?
Unless I missed something, no one went any deeper into the engine than the oil pan, right?
I still don’t understand this diagnostic method.
Unless I missed something, no one went any deeper into the engine than the oil pan, right?
I still don’t understand this diagnostic method.
The following users liked this post:
Robocop305 (12-05-2020)
#116
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It's pretty simple. 9A1 engines don't shed debris and with the amount of FOD in the filter and oil, there has to be damage in the engine that won't repair itself. Running the engine any further can lead to more damage and expense or even render the core engine un-salvageable. Used 9A1 engines are pricey.
#117
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I guess my fault for using a term rebuild. Jake spent over an hour with me on the phone talking about different scenarios. Of course we will start with diagnosing the problem and if theres possibility of repairing it for significantly less we will go that route. I just dont want to spend the time towing around the car to a shop to borescope it and then still find out we have internal problem we kind of know that we do. The car is making loud banging noise and shedding metal. I would just rather have a car at a shop that i would want to rebuild my engine because it most likely will need it, instead of having some shop take it apart and then still have to send it out in pieces.
#118
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
When a customer brings an engine in pieces to a shop, that's bad. We call that a trunk job. You can't ever charge enough for those and usually all the bits are damaged in transport and stuff is missing. What a nightmare!
#119
Intermediate
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Few months ago my wife's car (Nissan) was making clunky metallic noise, especially when cold, she brought it to transmission shop then another mechanic who both said 99.9% transmission/clutch whatever was shot. I chimed in and said ok let me check the engine oil just so...you know...only to find out there was almost none in there. Filled up, problem fixed and case closed. I mean me neither I don't get it, between the clueless OP swapping parts at random and people "selling" full on engine rebuild it's just insane.
#120
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Do you even comprehend what you just wrote here?
Few months ago my wife's car (Nissan) was making clunky metallic noise, especially when cold, she brought it to transmission shop then another mechanic who both said 99.9% transmission/clutch whatever was shot. I chimed in and said ok let me check the engine oil just so...you know...only to find out there was almost none in there. Filled up, problem fixed and case closed. I mean me neither I don't get it, between the clueless OP swapping parts at random and people "selling" full on engine rebuild it's just insane.