Help in Xpipe install on 997.2
01-12-2019, 08:39 PM
#17
Update:
I was able to take off the bolts by drilling them out using Car Fanatic / dc2000 trick on his video below.
https://rennlist.com/forums/997-foru...l#post15451841
No other methods worked with me period! hammering it with punch didn't do ****. Bolts were rusted to the point as they were welded.
If you ever be in same situation, don't waste your time and just drill them out. These bolts are Pain in the ***
I was able to take off the bolts by drilling them out using Car Fanatic / dc2000 trick on his video below.
https://rennlist.com/forums/997-foru...l#post15451841
No other methods worked with me period! hammering it with punch didn't do ****. Bolts were rusted to the point as they were welded.
If you ever be in same situation, don't waste your time and just drill them out. These bolts are Pain in the ***
The following users liked this post:
VT Blue (07-12-2020)