991.1 Sport Design wheel on 997.2
#16
RL Community Team
Rennlist Member
Rennlist Member
Anyone looking to do a DCT wheel and not wanting to give up their current steering wheel (because it's something other than stock), I have a base black leather 997.1 wheel with triangular airbag I'll sell for half their core charge, which will save you a couple hundred $s or if anyone's wheel is tired and you need a replacement. I also have a 997.1 gauge cluster with black faces if anyone is interested in that.
#17
Three Wheelin'
Hey I also have a 2009 with the triangle airbag. Do you maybe want to sell your triangle multifunction wheel. If so I maybe interested.
#18
RL Community Team
Rennlist Member
Rennlist Member
#19
Three Wheelin'
Thanks for the heads up. That will make it easier to find one if I can just pull the guts out of a different colored wheel. Hopefully all the connections are the same.
#20
Three Wheelin'
The used module I bought was from a 2009 car so you may be ok. Website is gpsadaptor.us. Go to the blog section you can find a link to how to change the module. I actually installed a 2017 tiptronic cayenne wheel. Removed the paddles and multifunction as it was so hard to find a good deal on a manual wheel. Given you already have steering controls activated his module may be of interest.
#21
Rennlist Member
#22
mike
#23
Rennlist Member
Thanks for your reply. I am looking for non-pdk and with just heating. I do not think Macan will work in that case as all are PDK. Will keep looking.
#25
for anyone needing a guide on going from Multifunction to non-multifunction wheels (997.1+) here’s a good guide I’ve been linked to
#27
Three Wheelin'
So is the control module in the steering wheel or is it in the steering column beneath the wheel? Just wondering if I buy a multifunction steering wheel if the module will be in there or will I need to buy that separately.
#28
Rennlist Member
#29
Three Wheelin'
#30
Do you have the part number of the steering wheel you installed? These came with 997xxxx or 991xxxx part numbers and while the former is a definite fit into a 997.2 with an original steering like yours, the latter I hear requires programming at the dealer. Can anyone please confirm if this is true (for a PDK car). If there is a problem, is it with the airbag or the paddles, will it require the Ipas code or can any workshop tweak the settings. Thank you.