SOUL | 997.1 Carrera Exhaust Development Thread
#151
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
@Soul Performance Hello! Just ordered a valved exhaust setup through TKX here in NYC. Very excited but did have a question. I noticed in all the photos I could find of 997's with the valved exhaust, the tips hang much lower. I just eliminated that on my car with new engine mounts... Will that gap still be present once I get the Soul exhaust? Or will ti be tucked properly? I noticed on the muffler bypass the tips seem to sit normally.
Thanks!
Thanks!
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
Regards,
John Gaydos
__________________
SOUL PERFORMANCE PRODUCTS
Quality Exhaust Solutions, Fair Pricing, and Outstanding Service
John Gaydos- Owner, Performance Specialist
Cell - (484) 883-6197
johng@soulpp.com
Jon Wheel - Marketing Manager
jwheel@soulpp.com
![](https://rennlist.com/forums/signaturepics/sigpic191275_4.gif)
SOUL PERFORMANCE PRODUCTS
Quality Exhaust Solutions, Fair Pricing, and Outstanding Service
John Gaydos- Owner, Performance Specialist
Cell - (484) 883-6197
johng@soulpp.com
Jon Wheel - Marketing Manager
jwheel@soulpp.com
![](https://rennlist.com/forums/signaturepics/sigpic191275_4.gif)
The following users liked this post:
misterdega (01-25-2022)
#152
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![](https://soulpp.com/wp-content/uploads/2022/01/SOULwewantyou.jpg)
We're looking for a 997.1 (and 996) Carrera local to our Willow Grove, PA facility for continued R&D! If you're available and interested shoot us a message!
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
-Mike
#153
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Here's Aaron finishing up a Valved Exhaust System. We're fortunate to have him as he loves his job, works extremely hard, and cares about the quality of his work as he craves to work on the more intricate designs we offer. He thanks everyone for the opportunity!
![](https://soulpp.com/wp-content/uploads/2022/02/SOUL-997.1-Carrera-Valved-Exhaust-Fabrication-7.jpg)
-Mike
![](https://soulpp.com/wp-content/uploads/2022/02/SOUL-997.1-Carrera-Valved-Exhaust-Fabrication-7.jpg)
-Mike
The following users liked this post:
Scalp_em (02-11-2022)
#154
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Here's Aaron finishing up a Valved Exhaust System. We're fortunate to have him as he loves his job, works extremely hard, and cares about the quality of his work as he craves to work on the more intricate designs we offer. He thanks everyone for the opportunity!
-Mike
-Mike
The following users liked this post:
Soul Performance (02-11-2022)
#155
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Here's Aaron finishing up a Valved Exhaust System. We're fortunate to have him as he loves his job, works extremely hard, and cares about the quality of his work as he craves to work on the more intricate designs we offer. He thanks everyone for the opportunity!
![](https://soulpp.com/wp-content/uploads/2022/02/SOUL-997.1-Carrera-Valved-Exhaust-Fabrication-7.jpg)
-Mike
![](https://soulpp.com/wp-content/uploads/2022/02/SOUL-997.1-Carrera-Valved-Exhaust-Fabrication-7.jpg)
-Mike
#156
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
That was a week ago, but if you email me your order info at marketing@soulpp.com I'll take a look and see if I can get you some shots! ![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
-Mike
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
-Mike
The following users liked this post:
misterdega (02-14-2022)
#157
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
We're back under development here at SOUL! We're working on a set of non-valved side mufflers. If you have any interest in being an early adopter, please let us know! ![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
-Mike
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
-Mike
Last edited by Soul Performance; 04-05-2022 at 01:56 PM.
The following users liked this post:
misterdega (02-25-2022)
#158
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I just pulled the trigger on a set of Soul headers and performance cats. I'm very curious to hear how this combo sounds (and performs) with the stock mufflers. A valved exhaust may come sometime after, but first I have to deal with this year's tax bill
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
The following users liked this post:
Soul Performance (04-05-2022)
#159
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Last edited by Scalp_em; 04-05-2022 at 10:11 AM.
#160
Racer
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
We're back under development here at SOUL! We're working on non-valved side mufflers for those who are looking for a sporty level of sound - right in the middle of where our Valved Exhaust would be with both modes considered. If you have any interest in being an early adopter, please let us know! ![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
-Mike
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
-Mike
#161
Instructor
#162
Rennlist Member
#163
Rennlist Member
#164
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have the performance cats already installed in the car (love them) and I have the headers sitting in their box in my garage. They've been that way coming up on 3 months now
![Frown](https://rennlist.com/forums/images/smilies/frown.gif)
The following users liked this post:
sburke91 (04-11-2022)
#165
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Last week we had @double_r_detailing's 997.1 Carrera in for Competition Headers to pair with his existing Sport Catalytic Converters and Muffler Bypass Pipes! The end result is a smoother tone and some more grunt!
-Mike
-Mike