996 Turbo Picture Thread
07-29-2017, 04:18 PM
#586
07-29-2017, 04:23 PM
#587
07-29-2017, 09:44 PM
#588
Rennlist Member
corbeau lg1 in leather with sub mounts and inflatable lumbar
actually the tire pressure and my max boost is about the same!! 35 psi just about maxes the turbos out. main mods would be rods and head studs, fueling, clutch and trans . for mine it was borg warner 7163 efr turbos, rods , 12mm studs and machine work, crank micro polishing, gt3 oil pump, 3.8 pistons and liners and rings from cp carrillo and la sleeves,deblais big cams, 997 lifters, head work, 82 mm t/b srm plenum, 2100 cc injectors, billet rails proefi 210 mj coils , 8mm plug wires the list goes on and on. proefi 128 engine management to control everything and run e85 with on the fly tuning
actually the tire pressure and my max boost is about the same!! 35 psi just about maxes the turbos out. main mods would be rods and head studs, fueling, clutch and trans . for mine it was borg warner 7163 efr turbos, rods , 12mm studs and machine work, crank micro polishing, gt3 oil pump, 3.8 pistons and liners and rings from cp carrillo and la sleeves,deblais big cams, 997 lifters, head work, 82 mm t/b srm plenum, 2100 cc injectors, billet rails proefi 210 mj coils , 8mm plug wires the list goes on and on. proefi 128 engine management to control everything and run e85 with on the fly tuning
The following users liked this post:
travs_997 (05-24-2024)
07-29-2017, 09:59 PM
#590
07-31-2017, 02:07 AM
#591
corbeau lg1 in leather with sub mounts and inflatable lumbar
actually the tire pressure and my max boost is about the same!! 35 psi just about maxes the turbos out. main mods would be rods and head studs, fueling, clutch and trans . for mine it was borg warner 7163 efr turbos, rods , 12mm studs and machine work, crank micro polishing, gt3 oil pump, 3.8 pistons and liners and rings from cp carrillo and la sleeves,deblais big cams, 997 lifters, head work, 82 mm t/b srm plenum, 2100 cc injectors, billet rails proefi 210 mj coils , 8mm plug wires the list goes on and on. proefi 128 engine management to control everything and run e85 with on the fly tuning
actually the tire pressure and my max boost is about the same!! 35 psi just about maxes the turbos out. main mods would be rods and head studs, fueling, clutch and trans . for mine it was borg warner 7163 efr turbos, rods , 12mm studs and machine work, crank micro polishing, gt3 oil pump, 3.8 pistons and liners and rings from cp carrillo and la sleeves,deblais big cams, 997 lifters, head work, 82 mm t/b srm plenum, 2100 cc injectors, billet rails proefi 210 mj coils , 8mm plug wires the list goes on and on. proefi 128 engine management to control everything and run e85 with on the fly tuning
Holy hell.
have you dyno'd your car?
ran it in the quarter?
07-31-2017, 10:03 AM
#592
The following users liked this post:
travs_997 (05-24-2024)
08-02-2017, 08:33 AM
#595
Three Wheelin'
Thanks for the link Steve! When I arrived in Flores Azores I was surprised to see so many "live aboard", families with young kids, old folks, germans, Scandinavians, french etc that are sailing since years all over the world!!!!
08-02-2017, 02:12 PM
#596
08-18-2017, 02:17 AM
#597
Rennlist Member
Join Date: Aug 2017
Location: Metro Atlanta, GA area
Posts: 7,207
Received 2,091 Likes
on
1,317 Posts
Subscribed to go through later.
08-24-2017, 09:24 PM
#599
Sweet ride!
