Notices
996 Turbo Forum 1999-2005
Sponsored by:
Sponsored by:

Clutch advice

Thread Tools
 
Search this Thread
 
Old 07-12-2013, 04:18 PM
  #31  
Kevinmacd
Rennlist Member
 
Kevinmacd's Avatar
 
Join Date: Nov 2010
Location: SE Florida
Posts: 2,740
Likes: 0
Received 16 Likes on 15 Posts
Default

Not so sure I believe the engagement higher off the floor scenerio than a C2. I had a C2 and my tt actually to me engages closer to the floor. I did start to have engagement height issues. then I noticed the clutch master cylinder was starting to overflow. Fix replaced the slave and the accumulator and now engagement is where it should be. The accumulator was not holding as it should have been and the slave was replaced due to the overflow and clutch height engagement issues.
Old 07-12-2013, 04:36 PM
  #32  
tomofva
Rennlist Member
Thread Starter
 
tomofva's Avatar
 
Join Date: Mar 2013
Location: Virginia
Posts: 127
Likes: 0
Received 0 Likes on 0 Posts
Default

I noticed the clutch master cylinder was starting to overflow.
Thanks I will check in that department. I wish I had another Turbo to compare with. The pedal is very different between the C4 and TT.



Quick Reply: Clutch advice



All times are GMT -3. The time now is 04:20 AM.