Notices
996 Turbo Forum 1999-2005
Sponsored by:
Sponsored by:

PSM & ABS failure warning??

Thread Tools
 
Search this Thread
 
Old 09-20-2007, 02:43 AM
  #16  
turbolou
Instructor
 
turbolou's Avatar
 
Join Date: Aug 2007
Location: Lake Forest Calif.
Posts: 114
Likes: 0
Received 0 Likes on 0 Posts
Default Reply

I have had the same problem occur under hard WOT blast after I changed out the intercoolers twice this has happened. Before that no problem, Has to be something connected with the installation although I don't know what ? Car runs well & boost is ok. I took it to the dealer since I have an extended warranty. I'm thinking that I just should of bought the software & checked it myself.

Last edited by turbolou; 09-20-2007 at 03:00 AM.
Old 09-20-2007, 11:23 PM
  #17  
MK19
Racer
 
MK19's Avatar
 
Join Date: Aug 2006
Posts: 416
Likes: 0
Received 4 Likes on 2 Posts
Default

If it's been flashed, it could be related.....it was in my case and Upsolute fixed it free with an updtaed file.
MK19
Old 09-21-2007, 02:14 AM
  #18  
turbolou
Instructor
 
turbolou's Avatar
 
Join Date: Aug 2007
Location: Lake Forest Calif.
Posts: 114
Likes: 0
Received 0 Likes on 0 Posts
Default Reply

According to the dealer it was the mass air flow sensor. Hard to believe on a 13000 mile car.I guess I'll just have to wait & see.
Old 09-21-2007, 02:34 AM
  #19  
Kevin
Addict
Rennlist Member


Rennlist
Site Sponsor

 
Kevin's Avatar
 
Join Date: Jun 2001
Location: Northwest
Posts: 9,337
Received 336 Likes on 224 Posts
Default

Do you have a oiled K&N or BMC? The oiled filter media will knock out the MAF..
Old 09-21-2007, 02:42 AM
  #20  
turbolou
Instructor
 
turbolou's Avatar
 
Join Date: Aug 2007
Location: Lake Forest Calif.
Posts: 114
Likes: 0
Received 0 Likes on 0 Posts
Default Reply

Good point, Yes I recently installed a piper cross air filter which did nothing anyway & was told to remove it or the warranty on the new MAF would be voided. I didn't see any change in perf & opted to putting the stock AF back.



Quick Reply: PSM & ABS failure warning??



All times are GMT -3. The time now is 10:57 AM.