6 Piston Monoblock Brake kit $3,975.00
05-18-2008, 08:00 AM
#76
Danyol, The real issue with PCCBs isnt' if they'll work or not, but rather how expensive they are to replace. Although they seem to last longer than steel rotors, the replacement cost is what will hurt... Buy a set of steel rotors and run them for less than $800 shipped for all four rotors!
Mike
Mike
Kevin, a couple of quick questions.
I have an '03 (25k miles) with ceramics, while under the rear of the car yesterday I noticed "Brembo" stamped on the rear calipers. I haven't had a chance to check the 6 piston fronts; do Brembo make the parts for Porsche?
Are the calipers in this kit the same as the ones I have, with all the PCCB naysayers (though mine show no signs of wear yet, 2 track days), will I be able to retrofit steel rotors with the existing calipers?
I have an '03 (25k miles) with ceramics, while under the rear of the car yesterday I noticed "Brembo" stamped on the rear calipers. I haven't had a chance to check the 6 piston fronts; do Brembo make the parts for Porsche?
Are the calipers in this kit the same as the ones I have, with all the PCCB naysayers (though mine show no signs of wear yet, 2 track days), will I be able to retrofit steel rotors with the existing calipers?
07-22-2008, 10:04 AM
#79
Rennlist Member
07-23-2008, 09:37 AM
#83
Burning Brakes
Join Date: Jan 2007
Location: Miami, Florida
Posts: 1,241
Likes: 0
Received 0 Likes
on
0 Posts
larry...i think that the color combo between the yell. calipers and the minerva blue is going to look awesome. please post pics when you have them installed..
07-23-2008, 10:40 AM
#84
Professor of Pending Projects
Rennlist Member
Rennlist Member
07-23-2008, 04:22 PM
#86
Burning Brakes
Join Date: Jan 2007
Location: Miami, Florida
Posts: 1,241
Likes: 0
Received 0 Likes
on
0 Posts
larry dont use a phone camera quality is lousy..don't worry we can guide you through the process its pretty easy. if i can do it anybody can. you never know you may become so proficient at it thay you may start posting pics here of just about anything...lol 
.
.
07-24-2008, 10:30 PM
#87
Rennlist Member
I'll borrow my brother's digital camera and e-mail you the pics Manny and then you can post them for me. That much I know how to do. I don't know why the chat rooms make you jump through 10 hoops to post pictures. I thought computers were supposed to make things quick and easy. One click is easy, 10 is a pain in the ****, especially with my memory and lack of computer savvy.
07-25-2008, 09:03 AM
#90
Racer
Join Date: Jan 2006
Location: Melbourne, Australia
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
SeattleDL....how long did the install take?
Kevin, have all the components arrived at the UMW Skunkworks (Brake Kit, Pads, RS Motor mounts)? What Pads did you spec for me, remembering no racing only swift street driving?
Kevin, have all the components arrived at the UMW Skunkworks (Brake Kit, Pads, RS Motor mounts)? What Pads did you spec for me, remembering no racing only swift street driving?