2011 Prep: PMNA, Tarett, Alignment, AIM Data & Dash; BK; Write Up & Pics
#33
Rennlist Member
I have 1mm front toe as well, and with new tires, the car is on rails. But since Greg set my car up as well, it is no surprise. I do have a generally more aggressive set up, though, with 800/1000 springs, and F-3.7R-3.0 camber. I only wish it were easier to get to him, as I'd avail myself of his services more often.
#35
#39
Rennlist Member
Nice set-up, indeed.
I found that my data antenna would not pick up satellites (VIR) when initially on the undersurface of the hood, but once sats were picked up with the unit on top of hood, I could put it back on the underside and continue to get sat signals. Go figure.
I also remounted my display dash (G2X) higher off the column so that I could see the warning lights, should any come on. I once lost a serpentine belt and the first indication was my GEN light going on. Since the water pump runs on the same belt, pulling over promptly probably saved my motor. Since then I hate the thought of having that happen while on track and concentrating on the road and not seeing the light come on behind the data display. Just a thought.
Hoping car is back together in time for VIR. Maybe meet you there.
I found that my data antenna would not pick up satellites (VIR) when initially on the undersurface of the hood, but once sats were picked up with the unit on top of hood, I could put it back on the underside and continue to get sat signals. Go figure.
I also remounted my display dash (G2X) higher off the column so that I could see the warning lights, should any come on. I once lost a serpentine belt and the first indication was my GEN light going on. Since the water pump runs on the same belt, pulling over promptly probably saved my motor. Since then I hate the thought of having that happen while on track and concentrating on the road and not seeing the light come on behind the data display. Just a thought.
Hoping car is back together in time for VIR. Maybe meet you there.
#40
Mike
#42
Three Wheelin'