fleetknuckles

What a great resource this forum is. I'm thinking about a un-modified 996 GT3 and have 3 questions at the moment; hoping you can help.
1) are the gearbox synchros steel or brass?
2) what type of suspension adjustments are there?
3) how low is the front air dam?

Thanks.

Fleetknuckles
1979 911 SC

911SLOW

1. 1st/2nd gear are double-cone syncro
3-6 and R are single cone.
3-5 are steel
6 and R are special bronze
all gears but the R have a molybdenum coating

2. height camber toe

3. lowest point is brake duct 9cm front is a bit higher

4. welcome : )

fleetknuckles

Thanks for the info (most helpful) and for the welcome.

Fleetknuckles
1979 911 SC

P.J.S.

OT -- 911slow's avatars are better when they contain females

GTgears

The stock synchros for 3-6th on a 996 GT3 are brass, not steel.

911SLOW

I will let him know.

Thanks

911SLOW

From Service Information Technik:

brass for 996 mk1 gt3, steel for mk2 gt3.

GTgears

Is that a Euro manaul? Here in the states, the G96.88 was only put in the GT2...

007DT

+1