CF Decklid @ 4.5lbs
04-16-2005, 09:19 PM
#1
Racer
Thread Starter
CF Decklid @ 4.5lbs
this is a truely extarordinary piece!!! On one side you have the Cup blade for some 500lbs of downforce, on the other side it couples with the cup intake. It provides RAM air function, and oh yeah ... it also acts an engine cover. For all this it only weight 4.5lbs !
Last edited by quartermile; 04-16-2005 at 11:10 PM.
04-16-2005, 10:09 PM
#4
Racer
Thread Starter
Originally Posted by rockitman
quartermile. You are the GT3 Mod King!!! 
Z06 the stock decklid is 23lbs including wing. The cup wing is 4lbs, and the aluminum supports are about 1.5lbs.
04-16-2005, 10:15 PM
#5
Nordschleife Master
Originally Posted by quartermile
He he ... I think may be DC Lee has more mods. It is certainly not my goal to be king of anykind, simply want to achieve as nearly as possible GT3 cup specs. in a street car (with full leather interior.) The mod after this is louvered Lexans (and rear window) to complete the aero package with the cup wing. Esitmated weight currently is about 2800lbs so long ways to go.
Z06 the stock decklid is 23lbs including wing. The cup wing is 4lbs, and the aluminum supports are about 1.5lbs.
Z06 the stock decklid is 23lbs including wing. The cup wing is 4lbs, and the aluminum supports are about 1.5lbs.
04-16-2005, 10:32 PM
#6
Racer
Thread Starter
Originally Posted by rockitman
I know...just teasing you. Until you drop the muffler's, you won't have a complete cup car...
04-16-2005, 10:40 PM
#7
Nordschleife Master
Originally Posted by quartermile
You mean mufflers or cats? I run without mufflers about 70% of the time -- even on the street. I like DC Lee's setup much better. Only question .. is it loud enough?
Loud enough ?It does not get any louder at wot short of an F1 car...
Trending Topics
04-16-2005, 10:54 PM
#8
Instructor
Join Date: Nov 2004
Location: Never Never Land
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by quartermile
He he ... I think may be DC Lee has more mods. It is certainly not my goal to be king of anykind, simply want to achieve as nearly as possible GT3 cup specs. in a street car (with full leather interior.) The mod after this is louvered Lexans (and rear window) to complete the aero package with the cup wing. Esitmated weight currently is about 2800lbs so long ways to go.
Z06 the stock decklid is 23lbs including wing. The cup wing is 4lbs, and the aluminum supports are about 1.5lbs.
Z06 the stock decklid is 23lbs including wing. The cup wing is 4lbs, and the aluminum supports are about 1.5lbs.
04-16-2005, 11:04 PM
#10
Nordschleife Master
Originally Posted by Moogle
anyone got that picture of the street GT3 where someone ripped out nearly all the carpets and trim except the dash?
Last edited by rockitman; 09-19-2014 at 07:25 PM.
04-16-2005, 11:16 PM
#13
Racer
Thread Starter
Here are a couple of interior shots, first one prior to the console delete. It's a Cadilac baby!
The interior carpet stuff on a GT3 is probably worth 15lbs if that. Plus when you run the open pipes it must get loud as hell inside.
Originally Posted by WULF
If your going to do something you might as well go all the way!
