Notices
996 GT2/GT3 Forum 1999-2005
Sponsored by:
Sponsored by:

Front Discs / Rotors

Thread Tools
 
Search this Thread
 
Old 02-08-2005 | 11:56 AM
  #1  
SeanGT3RS's Avatar
SeanGT3RS
Thread Starter
Intermediate
 
Joined: Apr 2004
Posts: 37
Likes: 0
Default Front Discs / Rotors

Hi Guys

I am looking for some replacement front discs / rotors that are none Porsche. I am fed up witht he standard discs cracking.

Has anyone tried any other brands. I want to keep the standard Calipers and the Pagid pads.

if I can loose some weight that will be good. But my main aim is to extend the life of the disc / rotor.

Cheers Sean
Old 02-08-2005 | 12:00 PM
  #2  
Mr. C4's Avatar
Mr. C4
Drifting
 
Joined: Feb 2002
Posts: 2,057
Likes: 0
From: Kuwait & Sweden
Default

Sean,

Try the Cup discs from Porsche Motorsport or Performance Friction (2 piece) with aluminium hats and grooved discs.

Ciao,

Johannes E.
Old 02-08-2005 | 01:11 PM
  #3  
mds's Avatar
mds
Pro
 
Joined: Dec 2002
Posts: 664
Likes: 0
Default

Cup discs crack just as fast as the OEM's. I just ordered the Brembo floating discs. Front is a direct bolt-on, rear requires ebrake removal. Tested at Daytona. Brembo claims weight savings at 12lbs per axle.
Old 02-08-2005 | 02:10 PM
  #4  
4carl's Avatar
4carl
Race Car
 
Joined: Jan 2004
Posts: 3,935
Likes: 1,196
From: santa barbara
Default

How much for the brembos and do they come in 350mm for PCCB rears? carl
Old 02-08-2005 | 02:11 PM
  #5  
cosmos's Avatar
cosmos
Rennlist Member
 
Joined: Nov 2002
Posts: 3,842
Likes: 1,256
From: Between rock and hard place
Default

Here we go again. DEVEK has some great floating hat rotors that also save about 6lbs per side. I know cause I have a set on my car now. You can get drilled or slotted. These are also floating hat rotors as well.

They are a board sponsor.
Old 02-08-2005 | 02:36 PM
  #6  
Z06's Avatar
Z06
Three Wheelin'
 
Joined: Dec 2003
Posts: 1,755
Likes: 16
From: Toronto
Default

I have the AP racing front floating rotors...they are race quality...they rattle a bit over bumpy roads...kind of anoying...AP is owned by Brembo.

Another choice used by Speedvision cars is Performance Friction...

Both the AP and the PF are hard core race pieces. Can't go wrong with either choice.
Old 02-08-2005 | 02:42 PM
  #7  
Z06's Avatar
Z06
Three Wheelin'
 
Joined: Dec 2003
Posts: 1,755
Likes: 16
From: Toronto
Default

I think they are about 2lbs lighter per rotor over stock.
Old 02-08-2005 | 02:42 PM
  #8  
cosmos's Avatar
cosmos
Rennlist Member
 
Joined: Nov 2002
Posts: 3,842
Likes: 1,256
From: Between rock and hard place
Default

ZO6,

I looked into the PFC rotors, (I have their pads and love them), but they wanted $1k each rotor, yes each rotor!! I don't know what that is Canadian, but I bet its a still a lot. However, the rotors, do look very cool, and have a very trick slot design.
Old 02-08-2005 | 03:00 PM
  #9  
Z06's Avatar
Z06
Three Wheelin'
 
Joined: Dec 2003
Posts: 1,755
Likes: 16
From: Toronto
Default

cosmos,

The AP rotors per set $1750 up to $2000...which everybody thought was Alcon...they are not Alcon.
Old 02-08-2005 | 03:17 PM
  #10  
4carl's Avatar
4carl
Race Car
 
Joined: Jan 2004
Posts: 3,935
Likes: 1,196
From: santa barbara
Default

Per set? 2or 4? carl
Old 02-08-2005 | 03:57 PM
  #11  
Z06's Avatar
Z06
Three Wheelin'
 
Joined: Dec 2003
Posts: 1,755
Likes: 16
From: Toronto
Default

Sorry...for the front 2
Old 02-08-2005 | 04:15 PM
  #12  
vegasgolf98's Avatar
vegasgolf98
Racer
 
Joined: Feb 2004
Posts: 473
Likes: 0
From: Henderson, NV
Default

I just got the AP's as well, cost about $2,200. They are supposed to last 10x as long as the OEM rotor. White Lightning uses them for the RSR (LeMans and ALMS), so I guess they will work for me. Call Kent Moore at Premier Sportscar Service at (702)649-8267 tell him Philip sent you.

BTW, you need to bed these in properly or they will vibrate.
Old 02-08-2005 | 07:19 PM
  #13  
Z06's Avatar
Z06
Three Wheelin'
 
Joined: Dec 2003
Posts: 1,755
Likes: 16
From: Toronto
Default

Paul from the Racers Group has another choice for 2 piece rotors that come in $300. less.
Old 02-08-2005 | 08:14 PM
  #14  
vegasgolf98's Avatar
vegasgolf98
Racer
 
Joined: Feb 2004
Posts: 473
Likes: 0
From: Henderson, NV
Default

White Lightning usually always beats the Racers Group in endurance racing, so I'll stick to the same parts that they use, but good to know.
Old 02-08-2005 | 09:31 PM
  #15  
Jack's Avatar
Jack
Addict
Rennlist Member

 
Joined: May 2001
Posts: 1,183
Likes: 2
From: Los Angeles
Default

Originally Posted by Z06
cosmos,

The AP rotors per set $1750 up to $2000...which everybody thought was Alcon...they are not Alcon.

Brembo 2-piece floating hat rotors, J-hook slotted, under $1800 per pair, front or rear. This setup was used by Howard/Boss Motorsports team at Daytona -- I was told that the rotors/pads went the entire 24 hours.


Quick Reply: Front Discs / Rotors



All times are GMT -3. The time now is 07:48 PM.