Wheel Dynamics

LIMITED TIME PROMOTION FOR THE MONTH OF MARCH 2016

We are offering out to the first 5-orders ONLY the R-66 Concave Mesh Wheels for only $1099 SHIPPED (most locations in the USA). This promotion is scheduled to end on March 31, 2016 or when we sell 5-sets which ever comes first.

The R-66 19" wheels have a deep concave design and are matched with a stainless steel (chrome look) lip accents as well as hand-brush accents depending on your choice of color. These wheels are manufactured by MRR exclusively for Wheel Dynamics.

Color combos available: Matte Black & Stainless lip, Brush face & Gloss Black & Brush face & Silver both with Stainless lip. These wheels are available in 19x8.5 et. 45 & 19x11 et. 52 and et.40.

The wheels accept factory size lug bolts & TPMS equipment so you don't have to compromise safety for using aftermarket wheels. These wheels are both VIA & JWL certified. NO spacers, hub centric rings or adapters required for most Porsche applications.

Applications include the Porsche 996 997 991 C2, C4, C2S, C4S, Turbo, GT3 & GT2) CUSTOM FINISHING IS AVAILABLE AT ADDITIONAL COST.

Place your order at: 626-443-9100
SEE MORE PHOTOS HERE: http://wheeldynamics.com/porsche-cars.html

kab1994

Do this deal on the Fuchs replicas for NB996.2 and you've got a buyer right here!

Wheel Dynamics 2

We just ran a promotion on those wheels.... But to sell them at this price would mean we would have to pay out of our pocket to give them to you at this price...

kab1994

Oh man I wish I would have known! What was the promotion? I have wanted them for a while.

Copilot

Sweet wheels! What do they weigh front and rear?

Wheel Dynamics 2

We dropped the price down to $1699 for the set instead of the $1899 they currently are. email us info@wheeldynamics.com and I'll see what I can do if you need the 10" wide rear set-up, if you need the 11" you'll be out of luck.

Thanks,

Wheel Dynamics 2

Will get back with you Monday, we are closed over the weekends, but we do have direct fitment for your wide body et. 45 front and et. 40 rear.

Coloradocurt

Too bad those R-66's aren't 18's!

Copilot

Thank you! Looking at new wheels, and have it narrowed down to these or another set of 19". Weight will decide the winner

Wheel Dynamics 2

Managed to pull one off the showroom wall and toss it on the scale (rear only) 28.5-lbs, I would estimate the front to be at 25-26-lb rage.

If you are weighing your options, these are not the lightest wheel we offer.

Wheel Dynamics 2

We have often considered bringing back the RS-903 wheels in 18"

AWDGuy

^yes please

craig001

Bump for another set of nice wheels. If I hadn't picked up a set of 997TT wheels I seriously consider these, especially at $1099.

dvs3.6

^^ please...please do!

Wheel Dynamics 2

Guys, the only problem is the logistics, we need to bring a full container of wheels in order to bring those in. Also the added cost to mold out an 11" rear which was not original is costly so the sets in 11" would be around $1599/set.

If we were to get a solid 20-sets pre-sold we might be willing to take on a container full to get going again (that's over 400-pieces)... that's a lot of committed folks, but then again a container full + shipping + duties + fees + delivery etc. is a whole lot on our end to make this happen!

Looks like you have two already interested off this one thread.

Let us know...