In need of HELP!!!!
#19
Update: Well last night I didn’t get a chance to work on the 911, but this morning I was going to make a video of the clanking noise and post it, Before I started the car I wiggle the stick shift back and forth and side to side, then I proceeded to start the car, I started the car then went to the back to start video recording and the noise was GONE..... So this weekend I will fix the shifter and take some pics of the work.
thank you all again for the responses and the links!!!!!
thank you all again for the responses and the links!!!!!
#20
I'm not sure how I managed to miss the whining/clanking sounds you mentioned in the first post. That would have freaked me right out. One possible source for both sounds could be a failing SAI pump - certainly a known suspect for whining, and someone else posted that theirs was making a "pinging metal-on-metal sound" - which I'm really hoping is your "clanking."
https://rennlist.com/forums/996-foru...tify-part.html
If the "clanking" sounds more like marbles in a coffee can, don't run it any more.
https://rennlist.com/forums/996-foru...tify-part.html
If the "clanking" sounds more like marbles in a coffee can, don't run it any more.
#22
Nordschleife Master
Joined: Nov 2008
Posts: 5,815
Likes: 55
From: Mooresville, IN (Life Long Cheesehead)
#23
Sorry im trying to upload pics and this phone is P&^^$$#% me off.... ill get the pics up soon
Jacked up the car and worked from the ground.
Found both cables dethatched.
Slide then back to where they belong.
$2.49 Zip Ties.
Zip Tie them tight!!!!!!
Secured the cables with Zip Ties and the 911 is shifting like new...... thank you all again!!!!!!
Jacked up the car and worked from the ground.
Found both cables dethatched.
Slide then back to where they belong.
$2.49 Zip Ties.
Zip Tie them tight!!!!!!
Secured the cables with Zip Ties and the 911 is shifting like new...... thank you all again!!!!!!
Last edited by Medevack1; 12-15-2014 at 12:43 PM.
#26
Thank you im glad I did too thanks to everyone who helped me !!!!
Yes thank you also !!!!!!!
Good job!....and you didn't fall for the "oh man you better drop the motor" or "call AAA and get her flatbedded STAT!"