FVD Brombacher - High Quality IMS Repair Kits are $ 495 - New Release!!
#1
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Thread Starter
FVD Brombacher - High Quality IMS Repair Kits are $ 495 - New Release!!
In our constant quest to bring our customers the finest quality parts we have just released our IMS Bearing Repair Kits. These bearings are made for us by SKF in Germany and use the best materials available from them to ensure reliability and longevity. These kits retail for $ 495.
IMS Repair Kit "M96. Single Row" Ceramic – FVD Part # FVD 105 901 03 - $ 495
There is a lot of information online about IMS bearing failures, why they occur, how to detect them, how to install an aftermarket bearing, etc. So there is no need for us to go into depth on the subject. Our stance is to sell a top of the line bearing produced to higher specifications than what was originally in the car and is currently available on the market.
FVD IMS Bearings are manufactured by SKF in Germany and are highest rated SKF “Super-Precision” class of bearings which are characterized by:
High-speed capability
High load carrying capacity
High stiffness
Low Friction
Our Single Row Ceramic Bearings consist of the highest grade ball material which are 100% ceramic. The ball lubrication is a vital consideration so we chose the highest available heat resistant lubricant which is good to 160 degrees Celsius. We also chose the most durable housing seal made for its re-lubrication characteristics. These facts allow our bearings to run cooler and allow SKF to guarantee double service life over standard bearings.
IMS Repair Kit "M96. Dual Row" – FVD Part # FVD 105 901 04 - $ 495
There is a lot of information online about IMS bearing failures, why they occur, how to detect them, how to install an aftermarket bearing, etc. So there is no need for us to go into depth on the subject. Our stance is to sell a top of the line bearing produced to higher specifications than what was originally in the car and is currently available on the market.
FVD IMS Bearings are manufactured by SKF in Germany and are highest rated SKF “Super-Precision” class of bearings which are characterized by:
High-speed capability
High load carrying capacity
High stiffness
Low Friction
Our Dual Row Bearings consist of the highest grade ball material available in a dual row bearing. The ball lubrication is a vital consideration so we chose the highest available heat resistant lubricant which is good to 160 degrees Celsius. We also chose the most durable housing seal made for its re-lubrication characteristics. These facts allow our bearings to run cooler and allow SKF to guarantee double service life over standard bearings.
IMS Repair Kit "M96. Single Row" Ceramic – FVD Part # FVD 105 901 03 - $ 495
There is a lot of information online about IMS bearing failures, why they occur, how to detect them, how to install an aftermarket bearing, etc. So there is no need for us to go into depth on the subject. Our stance is to sell a top of the line bearing produced to higher specifications than what was originally in the car and is currently available on the market.
FVD IMS Bearings are manufactured by SKF in Germany and are highest rated SKF “Super-Precision” class of bearings which are characterized by:
High-speed capability
High load carrying capacity
High stiffness
Low Friction
Our Single Row Ceramic Bearings consist of the highest grade ball material which are 100% ceramic. The ball lubrication is a vital consideration so we chose the highest available heat resistant lubricant which is good to 160 degrees Celsius. We also chose the most durable housing seal made for its re-lubrication characteristics. These facts allow our bearings to run cooler and allow SKF to guarantee double service life over standard bearings.
IMS Repair Kit "M96. Dual Row" – FVD Part # FVD 105 901 04 - $ 495
There is a lot of information online about IMS bearing failures, why they occur, how to detect them, how to install an aftermarket bearing, etc. So there is no need for us to go into depth on the subject. Our stance is to sell a top of the line bearing produced to higher specifications than what was originally in the car and is currently available on the market.
FVD IMS Bearings are manufactured by SKF in Germany and are highest rated SKF “Super-Precision” class of bearings which are characterized by:
High-speed capability
High load carrying capacity
High stiffness
Low Friction
Our Dual Row Bearings consist of the highest grade ball material available in a dual row bearing. The ball lubrication is a vital consideration so we chose the highest available heat resistant lubricant which is good to 160 degrees Celsius. We also chose the most durable housing seal made for its re-lubrication characteristics. These facts allow our bearings to run cooler and allow SKF to guarantee double service life over standard bearings.
__________________
__________________
FVD Brombacher - USA
Contact me directly to get the latest FVD forum member discount!
Rhonda Roxburgh
+1-954-571-2050 x 1
rhonda.roxburgh@fvd.net
Want to learn more about us? Click here...
__________________
FVD Brombacher - USA
Contact me directly to get the latest FVD forum member discount!
Rhonda Roxburgh
+1-954-571-2050 x 1
rhonda.roxburgh@fvd.net
Want to learn more about us? Click here...
Last edited by Rhonda@FVD; 03-27-2014 at 04:14 PM.
#2
Advanced
Join Date: Feb 2014
Location: upstate in NY'S beautifull hills
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Do these kits require special tools to install and if so what would total cost be ?
Thankyou
-----------------------------------------------------------------
Found the required tool kit in your site for $195
----------------------------------------------------------------
Bob
--------------------------------
01 C4
31 Ford cp chp & ch, 302/350
40 ******, 302/350
38 Ford cp, 327/350
57 Belair
62 356B --long ago
Thankyou
-----------------------------------------------------------------
Found the required tool kit in your site for $195
----------------------------------------------------------------
Bob
--------------------------------
01 C4
31 Ford cp chp & ch, 302/350
40 ******, 302/350
38 Ford cp, 327/350
57 Belair
62 356B --long ago
Last edited by STAGGERWING; 03-21-2014 at 06:36 PM.
#6
Racer
The flier says:
1) Nothing about the dual row bearing being fitted with ceramic *****, so I assume that standard steel is used in lieu of ceramic......
2) Looks like the bearings are sealed & not open to splash lubrication as in the LN Engineering retro fit upgrade. That means they are relying on the grease to lubricate.....
Are we going back to what Porsche originally designed but with a more expensive bearing - the dual row is sealed, it uses grease as it lubrication and it has steel bearings and race ??
1) Nothing about the dual row bearing being fitted with ceramic *****, so I assume that standard steel is used in lieu of ceramic......
2) Looks like the bearings are sealed & not open to splash lubrication as in the LN Engineering retro fit upgrade. That means they are relying on the grease to lubricate.....
Are we going back to what Porsche originally designed but with a more expensive bearing - the dual row is sealed, it uses grease as it lubrication and it has steel bearings and race ??
#7
Drifting
Join Date: Sep 2011
Location: Ephrata, PA, USA now. Originally from the UK
Posts: 3,075
Likes: 0
Received 20 Likes
on
15 Posts
Well that posting should cheer up Jake no end. Plus a good few of the posters who went with Jake's replacement IMS bearing. Not heard from Jake in a while so maybe he has something to do with this new one.
Trending Topics
#8
Pro
The flier says:
1) Nothing about the dual row bearing being fitted with ceramic *****, so I assume that standard steel is used in lieu of ceramic......
2) Looks like the bearings are sealed & not open to splash lubrication as in the LN Engineering retro fit upgrade. That means they are relying on the grease to lubricate.....
1) Nothing about the dual row bearing being fitted with ceramic *****, so I assume that standard steel is used in lieu of ceramic......
2) Looks like the bearings are sealed & not open to splash lubrication as in the LN Engineering retro fit upgrade. That means they are relying on the grease to lubricate.....
Single Row Ceramic Bearings consist of the highest grade ball material which are 100% ceramic.
The ball lubrication is a vital consideration so we chose the highest available heat resistant lubricant which is good to 160 degrees Celsius.
#9
Racer
Yes, I read that about the single row bearing, but as I said in my first comment "nothing about the DUAL row bearing being fitted with ceramic *****"....
One of the biggest arguments over the last million years was that the IMS failed because of its lubrication - or lack of it - when the grease was "washed" out by old engine oil.
Just when the IMS debates were dying down, looks like back to the future.
One of the biggest arguments over the last million years was that the IMS failed because of its lubrication - or lack of it - when the grease was "washed" out by old engine oil.
Just when the IMS debates were dying down, looks like back to the future.
#12
Advanced
Join Date: Feb 2014
Location: upstate in NY'S beautifull hills
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
SKF bearings have been around for many years & accepted as a quality bearing however I'd agree w/ adcampo that knowledge of actual testing for this application should be provided which I've also not seen from LN .
Last edited by STAGGERWING; 03-22-2014 at 10:13 AM.
#13
^SKF is the king of bearings IMO
#14
Pro