Finally getting around to installing the seats....and of course have questions
#1
Nordschleife Master
Thread Starter
Join Date: Nov 2008
Location: Mooresville, IN (Life Long Cheesehead)
Posts: 5,815
Likes: 0
Received 55 Likes
on
36 Posts
Finally getting around to installing the seats....and of course have questions
Quite some time ago some of you may remember that I got some version of GT3 seats with the help of my (our) buddy Ed. I hope you guys understand when I say this....I need to be in the right frame of mind to do some DIY's. This is one. I decided to start on the passenger side just in case I realized I was short something. Good thing because I'm stuck. The seat brackets are GT3 brackets. The floor mount sliders are flat. The floor mount sliders that came with car are angled at the front of the motorized slider. The front threaded hole for the bolt on the floor is at a angle downward. The floor also has a hole right behind the downward hole but it is not threaded. Question is do I use the downward hole? The bolt will than be at an angle and will not sit flat. Do I need to make a alum pie shaped shim?
Excuse my mad drawing skillz....
Excuse my mad drawing skillz....
#2
Parts Specialist
Rennlist Member
Rennlist Member
fit issues..... I never have that problem
so Pete after searching all my pics this is the best pic of my mount... I forgot what you have for parts...dont the sliders come off your stock seats and them the GT3 brackets go on your old sliders???
so Pete after searching all my pics this is the best pic of my mount... I forgot what you have for parts...dont the sliders come off your stock seats and them the GT3 brackets go on your old sliders???
#3
Parts Specialist
Rennlist Member
Rennlist Member
wait I sent you sliders...I wonder if those were mounted in an older car...Kyle (who I got them from) owned an older car...GT3 floor should be the same as 996 - awe boy....sounds like I messed this up.
on the bright side if you can use your stock sliders I will buy the other sliders from you
on the bright side if you can use your stock sliders I will buy the other sliders from you
#5
Nordschleife Master
Thread Starter
Join Date: Nov 2008
Location: Mooresville, IN (Life Long Cheesehead)
Posts: 5,815
Likes: 0
Received 55 Likes
on
36 Posts
Soooooo the question is can I use the sliders from motorized seats and put them on manual sliders? Can the sliders be removed from motorized seats?
#6
Parts Specialist
Rennlist Member
Rennlist Member
thats a real head scratcher....I bet not...my thinking is the power ones have some sort of gear mechanism but I never have seen them, what's it look like on the bottom of the seat that is out? - is there any sort of "knock out" in the front of the manual slider to make it form the angle? I dont think you want to make those angle spacer things, (in the WFT pdf) doesnt look safe
Trending Topics
#8
Parts Specialist
Rennlist Member
Rennlist Member
from the sparco website I see that ALL sliders are the same...for all cars....
which is what you have (basicly)
the differance is there is a base mount plate that sliders mount to that is "car specific"
I am really sure on my old ones they had car spacific sliders (see pic) and I knw for a fact I didnt use any base plate....
which is what you have (basicly)
the differance is there is a base mount plate that sliders mount to that is "car specific"
I am really sure on my old ones they had car spacific sliders (see pic) and I knw for a fact I didnt use any base plate....
#12
Race Director
So Pete, are you still in the mood to do a seat swap? I hate it when something I assumed was straight forward becomes another delayed project, that I was 'ready' to do.
#13
Nordschleife Master
Thread Starter
Join Date: Nov 2008
Location: Mooresville, IN (Life Long Cheesehead)
Posts: 5,815
Likes: 0
Received 55 Likes
on
36 Posts
Damn German bastards!!! It took me 5 Months to get the gumption to get into this. Yesterday afternoon at 2:48 PM the light bulb came on and I yelled at my wife in a George Constanza Father's voice "LET'S DO THIS!". My light bulb dimmed about 2 hours later. But I'm focused on this and it's gettin' done.
#14
Join Date: May 2010
Location: Saratoga Springs, NY
Posts: 1,997
Likes: 0
Received 38 Likes
on
30 Posts
Pete,
Sorry to hear that you are having a minor setback. I will let the real experts in here assist you, BUT, I know that you will love the seats, once you get them in! Hope you get them fitted-up shortly.
Sorry to hear that you are having a minor setback. I will let the real experts in here assist you, BUT, I know that you will love the seats, once you get them in! Hope you get them fitted-up shortly.