Apex996

I'm looking for an mk1 GT3 (Aerokit) rear wing. Either factory OEM or a very good replica with movable wing element. I've been watching EBay and only saw 1 in recent weeks.

Any leads? Other places I should be looking?

- Bill

CWay27

A red one was for sale last week.

deckman

Yes it was on the 6Speed for sale section. I don't know if it sold.

ivangene

Pthh
GT3 ? Why not go all the way, with a GT2 wing!

Ummm,
I even have one for you!!!

Apex996

Want the car to look "period" with mk1 full body kit. Thank I'll check out 6Speed. Any other places these things pop up occasionally?

deckman

They are on ebay all the time, but they are all aftermarket. There's also MAShaw. If you want to hold out for OEM, you will either pay the piper or wait until one comes up for sale.

red911c2

Is the mkII aerokit wing the same as the 996 GT3 wing? I'm considering (if it was a reasonable price) what a GT3 rear wing would look like on the back of my 40th...

Wellardmac

Both are GT3 wings, but from different periods. You would need a MkII wing for your car.

Marc Gelefsky

Wellardmac's is a Mk 1 GT3 wing and the one on my car is the Mk II GT3 wing.

zroadhouse

Ah, but she is such a beautiful car already! Plus it adds weight right where you don't want it...

deckman

I doubt the GT3 rear wing adds any weight. The stock lid is metal and the replacement wing and decklid are fiberglass. It's probably a wash or very close at least.

Wellardmac

Actually, no. The aero wings are lighter than the stock spoiler, as they're made out of fiberglass.

My aero wing was lighter than the decklid I removed.

chsu74

I recall Wayne has issues with aftermarket rear wing quality. If you are going that route, make sure you see it in person before buying it.

red911c2

Anyone know a ballpark price on an oem mkII wing?

Lerxst

Suncoast has the OEM MKII for $3680 and a replica for $1695. Make sure you get the aerocup wing, not the GT3 wing as the intake ducting is in a different location. Ask me how I know. However, I will be developing autocad plans this spring for a custom intake to make it work properly.