Is there some trick to getting the passenger side mirror to tilt in reverse?
#1
Burning Brakes
Thread Starter
Is there some trick to getting the passenger side mirror to tilt in reverse?
I know as of last week it worked. Put the car in reverse and the right side mirror tilts down so you can see the curb in a rear or parallel park. Now it doesn't do it. I DID have all the codes reset at an Indy for a CEL...could he have deleted or switched off that function by accident?...Any advice greatly appreciated....Nevermind..I found the answer on another forum. You have to have the car in reverse when you press M then the memory poistion you are using "key", 1, or 2. If I fine adjust my seat when driving, then I'm killing the mirror tilt each time, which is of course what I did.
#2
I know as of last week it worked. Put the car in reverse and the right side mirror tilts down so you can see the curb in a rear or parallel park. Now it doesn't do it. I DID have all the codes reset at an Indy for a CEL...could he have deleted or switched off that function by accident?...Any advice greatly appreciated.
If that's not it, since looking down is a dealer set function, I would bet it got reset. You will need to have it turned back on.
-td
#4
Check that your mirror adjustment switch is set to the driver's side mirror. I believe it won't "look" down when the switch is set to passenger side.
If that's not it, since looking down is a dealer set function, I would bet it got reset. You will need to have it turned back on.
-td
If that's not it, since looking down is a dealer set function, I would bet it got reset. You will need to have it turned back on.
-td
In my boxster, the mirror adjustment switch has be on the passenger side AND the car in reverse gear. You can also set it as part of the seat memory, and in that case, everytime u go to reverse, it does it automatically.
#5
It looks like maybe you have this solved, but just in case... check to see if you have reverse lights. There is a switch that controls these which is prone to failure. If it does fail, you lose the mirror tilting function also. It's a cheap fix. FWIW.
#7
Team Owner
Bingo! This happened to mine just last month...I had never even realized it and didn't even know this feature existed until today. Thanks, guys!
Trending Topics
#8
Nordschleife Master
Yeah, reverse switch that's in the tranny is bad. Do it yourself $12.25 at pelican and 15 minutes of your time. Or spend $100 for the dealer to do it.
http://www.pelicanparts.com/cgi-bin/...FILTER_TOOL=ON
http://www.pelicanparts.com/cgi-bin/...FILTER_TOOL=ON
#9
Pocket Sand
Rennlist Member
Rennlist Member
Join Date: Jul 2004
Location: Ask Rusty Shackleford.
Posts: 7,649
Likes: 0
Received 0 Likes
on
0 Posts
wait a minute, 996 mirrors automatically tilt!?
was this a factory option or something?
i've had this car for like 5+ years and didn't realize that this existed.
details please.
was this a factory option or something?
i've had this car for like 5+ years and didn't realize that this existed.
details please.
#12
Nordschleife Master
But, yes, this feature is available only on cars with seat memory. And, to engage this feature, the gear must be engaged in reverse (Tip or manual) when the seat position is stored in memory. it will work only with that memory number.
#13
Wait I have the memory seats, there is no mirror tilting or whatever when Im putting in the rear... is this a joke?? Ive never heard of mirror tilting...
So I need to program my position into the memory and then this will work?
So I need to program my position into the memory and then this will work?
#15
So I fallow this steps?
1. Putting the seat into the right position
2. Putting in Reserve gear
3. Getting the seat position into the memory (pushing the button ex nr1 for a few seconds?)
Do I also need to adjust the mirror how I would like it to be when its in reverse or does it know this by it self?
Havent had it long, almost a year, so only driven it one summer =)
1. Putting the seat into the right position
2. Putting in Reserve gear
3. Getting the seat position into the memory (pushing the button ex nr1 for a few seconds?)
Do I also need to adjust the mirror how I would like it to be when its in reverse or does it know this by it self?
Havent had it long, almost a year, so only driven it one summer =)