Techart Formula GTS 11" ET25??
#1
Techart Formula GTS 11" ET25??
Gents,
I have just bought a used set of Techart Formula GTS alloys for the 996 that I have not even bought yet....My questions is this, will a 11x19 ET25 (for Turbo body) fit a narrow bodied car?
Many thanks.
I have just bought a used set of Techart Formula GTS alloys for the 996 that I have not even bought yet....My questions is this, will a 11x19 ET25 (for Turbo body) fit a narrow bodied car?
Many thanks.
#2
Newbies Hospitality Director
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Apr 2005
Posts: 18,084
Likes: 34
From: Winston-Salem, NC
NO, they will not fit properly. OEM wheel sizes for a '02 - '04 996 are:
Front 8" x 18" with 50mm offset
Rear 10" x 18" with 65mm offset
The wheels/tires (11" x 19" 25mm offset) are going to EXTEND an additional 53mm (or 2") farther out than a 10" wide wheel with 65mm offset.
Here is a link to a wheel offset calculator which will help you understand the width/offset relationship.
http://www.1010tires.com/WheelOffsetCalculator.asp
Front 8" x 18" with 50mm offset
Rear 10" x 18" with 65mm offset
The wheels/tires (11" x 19" 25mm offset) are going to EXTEND an additional 53mm (or 2") farther out than a 10" wide wheel with 65mm offset.
Here is a link to a wheel offset calculator which will help you understand the width/offset relationship.
http://www.1010tires.com/WheelOffsetCalculator.asp
#6
Newbies Hospitality Director
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Apr 2005
Posts: 18,084
Likes: 34
From: Winston-Salem, NC
Originally Posted by rountreed
gota911, man you are always great for these offset questions!
There are a lot of topics discussed on this forum with which I have limited knowledge, so I sit back, read, and try to learn something.
However, when questions are asked about certain topics (like offsets) about which I have gained a lot of knowledge, I try to "chip in" and help others, just as many guys have helped me during the last couple of years. I am very pleased when I can help someone here, because I know how grateful I am to receive help.
#7
Newbies Hospitality Director
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Apr 2005
Posts: 18,084
Likes: 34
From: Winston-Salem, NC
Originally Posted by club411
I have a set of 18's techart forumula GT's for the narrow body I will trade for the turbo