Is my 911 toast?
#32
Nordschleife Master
Join Date: Oct 2015
Location: Zuffenhausen, Georgia
Posts: 5,358
Received 1,902 Likes
on
1,039 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Unfortunately, he doesn't have a good reputation here on RL and was eventually banned by IB.
#33
Rennlist Member
Join Date: Jan 2022
Location: Dahlonega , Georgia
Posts: 852
Likes: 0
Received 652 Likes
on
294 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
A recent Rennlist encounter , I would pass based on this link and others .
https://rennlist.com/forums/996-foru...a-warning.html
https://rennlist.com/forums/996-foru...a-warning.html
#34
Intermediate
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks all
I don’t even need to read the links. I was skeptical due to the price. I come from the things cost what they cost for a reason view of life. If everyone else charges a 1000 and they charge 400, there’s a reason why and it’s probably not a good one.
I am trying to source a engine without buying a new one or 100k mile used one. Seems to be all I’m finding.
The FSI looks amazing but pricey for my car. L/N same 30k before install.
The guys at Eurosport who did the bore scope told me not to bother with the short block. Heck of nice place and people.
If I end buying another car I will have them do the PPI and scope. Can’t say enough about them
I have more calls to make it seems.
I don’t even need to read the links. I was skeptical due to the price. I come from the things cost what they cost for a reason view of life. If everyone else charges a 1000 and they charge 400, there’s a reason why and it’s probably not a good one.
I am trying to source a engine without buying a new one or 100k mile used one. Seems to be all I’m finding.
The FSI looks amazing but pricey for my car. L/N same 30k before install.
The guys at Eurosport who did the bore scope told me not to bother with the short block. Heck of nice place and people.
If I end buying another car I will have them do the PPI and scope. Can’t say enough about them
I have more calls to make it seems.
#35
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yeah, Eurosport knows exactly what they are doing with an M9X engine. They support a large group of PCA club racers, DE guys and street guys with the engine. They have kept me out of trouble for over 2 decades with mine. Be there on Wed to get the car set up for track season and to replace my water pump.
#37
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks all
I don’t even need to read the links. I was skeptical due to the price. I come from the things cost what they cost for a reason view of life. If everyone else charges a 1000 and they charge 400, there’s a reason why and it’s probably not a good one.
I am trying to source a engine without buying a new one or 100k mile used one. Seems to be all I’m finding.
The FSI looks amazing but pricey for my car. L/N same 30k before install.
The guys at Eurosport who did the bore scope told me not to bother with the short block. Heck of nice place and people.
If I end buying another car I will have them do the PPI and scope. Can’t say enough about them
I have more calls to make it seems.
I don’t even need to read the links. I was skeptical due to the price. I come from the things cost what they cost for a reason view of life. If everyone else charges a 1000 and they charge 400, there’s a reason why and it’s probably not a good one.
I am trying to source a engine without buying a new one or 100k mile used one. Seems to be all I’m finding.
The FSI looks amazing but pricey for my car. L/N same 30k before install.
The guys at Eurosport who did the bore scope told me not to bother with the short block. Heck of nice place and people.
If I end buying another car I will have them do the PPI and scope. Can’t say enough about them
I have more calls to make it seems.
In any event, the short block is still a decent option. There was a time when those were like $6-$7k a few years ago, partially because they were on sale due to Porsche offering discounts on vintage car parts. Maybe you get lucky and call around and see if you can find one for a low cost.
The following users liked this post:
My1stpor (04-13-2024)
#38
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I doubt Brian has an issue with the short block. It's a billable hours issue. Still got to bolt all the parts on the engine. $8500+ for the short block, probably another $12k+ for labor and the inevitable parts that need to be replaced. Now you are over $20k. A very good deal versus $30-40k for a rebuild. And an even better deal if you can DIY.
But from a cost perspective assuming you can find a good engine with all the parts attached in good working order, you may be able to get away with $12k hole in your pocket. But that's a big assumption that parts are in good shape. For sure, the DIY guy will save quite a bit.
But from a cost perspective assuming you can find a good engine with all the parts attached in good working order, you may be able to get away with $12k hole in your pocket. But that's a big assumption that parts are in good shape. For sure, the DIY guy will save quite a bit.
The following users liked this post:
My1stpor (04-13-2024)
#40
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
What about the Audi 2.7? twin turbo plug in option that has been posted here several times. Is that a viable option? I’m keeping this in the back of my mind if I ever need to consider a replacement. OP - sorry for your situation.
#41
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
One option: Go to IAAI and buy a car wreaked in the front. Take the engine (some have video of them running) sell the salvageable bits of the car, maybe break even. Other options: If you are patient and look hard you can occasionally find motors that were removed for all sorts of reasons, and some that may be 'less' broken then yours. Take the two and make one good one. Do all the "While you are in there" tasks. I have had 996's, and every one of them arrived at my house on a trailer because they were broken. FInd an honest independent mechanic for the jobs you cannot do yourself. Good luck!
#42
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Has anybody ever called Chavis Performance? They do LS swaps for 996s, and I always wondered if some of those M96s that are removed are just fine.
#43
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
This is a good thread to revisit the topic of engine options for the DIY guy and the non-DIY guy as it pertains to objectives and costs. Costs may be going up, but the options are available. No right or wrong answer. It all depends on what the owner is trying to accomplish.
1. Swap
2. Short Block
3. Rebuild
1. Swap
2. Short Block
3. Rebuild
#44
Intermediate
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Good news
With the help of a great forum member I have located a shop who will replace the short block for a good price. Car will be dropped off in three weeks.
So No it’s not toast. 😎
With the help of a great forum member I have located a shop who will replace the short block for a good price. Car will be dropped off in three weeks.
So No it’s not toast. 😎
The following 4 users liked this post by My1stpor:
#45
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
You mean ... you bought a brand new short block from Porsche and this shop is going to remove your old engine, swap the heads over, put it back in the car, and start it up, for a reasonable labor charge?