Notices
996 Forum 1999-2005
Sponsored by:

Found this in my oil pan...

Thread Tools
 
Search this Thread
 
Old 07-01-2022, 07:41 PM
  #31  
evoroadster
Instructor
Thread Starter
 
evoroadster's Avatar
 
Join Date: Sep 2010
Location: Honolulu, Hawaii
Posts: 129
Received 74 Likes on 42 Posts
Default


OilVue analysis
The following users liked this post:
Mike Murphy (07-01-2022)
Old 07-02-2022, 07:34 AM
  #32  
3/98 911 coupe
Three Wheelin'
 
3/98 911 coupe's Avatar
 
Join Date: Mar 2021
Location: Katy Texas
Posts: 1,920
Received 679 Likes on 468 Posts
Default Thank you and surprise about DT 40

Originally Posted by evoroadster

OilVue analysis
I’m extremely happy for you. Everything looks great. Also I learned about the formulation of DT 40. They are using boron, that’s an antiwear additive. Their zinc and phosphorus levels are pretty close to Mobil one, but they are adding the extra kick, boron will help anti seizing, will help reduce noise all kinds of things. Their viscosity 14.4 is also higher. Their detergents calcium magnesium are a little low. They gave the acid number but no TBN. When I spoke with them they didn’t disclose that number. That could be the oils weak point. TBn or total base number is a measure of the basicity of oils to neutralize acids produced by remaining fuel. Also TBn indicates detergency and dispersancy of the oil. Keep on running the car. Change the oil every 6 months and yes continue to check the filters, I wouldn’t spend the money on more analysis until you see something off in the filter. Glad you are good.
The following users liked this post:
TheChunkNorris (07-02-2022)
Old 07-02-2022, 12:44 PM
  #33  
evoroadster
Instructor
Thread Starter
 
evoroadster's Avatar
 
Join Date: Sep 2010
Location: Honolulu, Hawaii
Posts: 129
Received 74 Likes on 42 Posts
Default

Thanks all for the support.
Old 01-10-2023, 05:56 PM
  #34  
evoroadster
Instructor
Thread Starter
 
evoroadster's Avatar
 
Join Date: Sep 2010
Location: Honolulu, Hawaii
Posts: 129
Received 74 Likes on 42 Posts
Default

Well 2600 miles later I changed oil and filter. DT40 oil and NAPA Gold spin on filter. Cut open the filter and the element was spotless. No magical glittery pieces at all. Magnetic drain plug had very little paste on it. Sent off samples to Oilvue and Blackstone. Durametric to be delivered next week. Car still runs fine.
The following 4 users liked this post by evoroadster:
EVOMMM (01-10-2023), fritzintn (01-12-2023), GC996 (01-10-2023), JohnCA58 (01-10-2023)
Old 01-11-2023, 10:52 AM
  #35  
3/98 911 coupe
Three Wheelin'
 
3/98 911 coupe's Avatar
 
Join Date: Mar 2021
Location: Katy Texas
Posts: 1,920
Received 679 Likes on 468 Posts
Default Awesome

Originally Posted by evoroadster
Well 2600 miles later I changed oil and filter. DT40 oil and NAPA Gold spin on filter. Cut open the filter and the element was spotless. No magical glittery pieces at all. Magnetic drain plug had very little paste on it. Sent off samples to Oilvue and Blackstone. Durametric to be delivered next week. Car still runs fine.
keep on driving. Every so often I check the oil for smell color etc from the dipstick and the coolant for intermix. Another suggestion I would make is to when you change your oil go ahead and clean the maf (mass air flow) meter, you will be surprised how much better the car runs after that. I’m glad for you.
Old 01-11-2023, 10:59 AM
  #36  
plpete84
Drifting
 
plpete84's Avatar
 
Join Date: Jul 2020
Location: Washington DC
Posts: 2,119
Received 1,874 Likes on 943 Posts
Default

Originally Posted by evoroadster
Well 2600 miles later I changed oil and filter. DT40 oil and NAPA Gold spin on filter. Cut open the filter and the element was spotless. No magical glittery pieces at all. Magnetic drain plug had very little paste on it. Sent off samples to Oilvue and Blackstone. Durametric to be delivered next week. Car still runs fine.
Good stuff. I gave OilVue a try recently too. Received the report but could not find Fuel Dilution value anywhere. Did your report have it or is it provided under another name? I've emailed them to ask but no response.
Old 01-11-2023, 11:51 AM
  #37  
TexSquirrel
RL Community Team
Rennlist Member
 
TexSquirrel's Avatar
 
Join Date: Aug 2016
Location: Richmond, TX
Posts: 5,378
Received 2,492 Likes on 1,332 Posts
Default

Originally Posted by 3/98 911 coupe
keep on driving. Every so often I check the oil for smell color etc from the dipstick and the coolant for intermix. Another suggestion I would make is to when you change your oil go ahead and clean the maf (mass air flow) meter, you will be surprised how much better the car runs after that. I’m glad for you.
+1
I ALWAYS check my oil every time I fill up.
It's been a habit for decades. (4 decades this May to be more exact)
Full service used to do it back in the 80s, so even though I never went to full service I checked it in self-serve.
I check smell and color and level on ALL my vehicles.
I used to use the paper towels the station provided, but these days they often have none.
I carry a roll of them in my trunks/frunk.
Old 01-11-2023, 03:29 PM
  #38  
evoroadster
Instructor
Thread Starter
 
evoroadster's Avatar
 
Join Date: Sep 2010
Location: Honolulu, Hawaii
Posts: 129
Received 74 Likes on 42 Posts
Default

I send off to both Oilvue and Blackstone. Oilvue due to their abiloity to identify larger suspended metal particles and Blackstone as a double check. Blackstone does report fuel dilution of oil.



Quick Reply: Found this in my oil pan...



All times are GMT -3. The time now is 07:21 PM.