996 Product Ideas
#61
Nordschleife Master
I think we are both on the same page here.....something better than the current plastic coolant expansion tank or design one that is relocated to the front near the radiators... perhaps having the expansion tank accessed through the front bumper area and also design a smaller front radiator to work in concert. At least it could be removed and installed by removing the front bumper and would open up the area around the rather warm engine.
The following 2 users liked this post by De Jeeper:
damage98MO (09-25-2023),
EVOMMM (02-28-2022)
#62
Rennlist Member
Great to see the interesting ideas in this thread - potentially a big market for hot rod type products for the 996 line.
Would love to see a lightweight door panel - like your RS panels
https://www.rennline.com/911-Door-Pa...-NF-911-06-00/
but for the 996
here's a couple examples found online:
Would love to see a lightweight door panel - like your RS panels
https://www.rennline.com/911-Door-Pa...-NF-911-06-00/
but for the 996
here's a couple examples found online:
#63
Rennlist Member
Join Date: Dec 2021
Location: Deep in the woods near PA border in People's Dystopia Republic of New Jersey
Posts: 157
Received 96 Likes
on
58 Posts
DeJeeper, good point on the placement of the coolant expansion tank. However, I would like to get one of these factory types of covers that might be padded maybe with some magnetics added and soft enough which are now NLA.
The following 2 users liked this post by Formerly996fried:
ScottBLEGO (03-11-2022),
TheUnscented (03-03-2022)
#64
Damn, that's amazing.
What's it called? Part number? Maybe one will surface on eBay eventually.
What's it called? Part number? Maybe one will surface on eBay eventually.
#65
Rennlist Member
They made one for the front seat too. I can dig up the part number, but I think it's NLA too.
The following 2 users liked this post by SoCal911t:
Breakthru (05-22-2022),
ScottBLEGO (03-11-2022)
#66
How about you guys gluing some high power magnets to the inside of the GT3 console-delete pattern and use the regular steel sheet in the phone case?
#68
RL Community Team
Rennlist Member
Rennlist Member
#69
Rennlist Member
Join Date: Dec 2021
Location: Deep in the woods near PA border in People's Dystopia Republic of New Jersey
Posts: 157
Received 96 Likes
on
58 Posts
How about carbon fiber instrument trim rings instead of brushed or polished aluminum....or the entire fascia that is usually black that surrounds the instruments with a choice between gloss and matte..
The following users liked this post:
EVOMMM (05-22-2022)
The following users liked this post:
EVOMMM (05-22-2022)
The following users liked this post:
freddworks (10-06-2023)
#72
I thought a customizable decal that could be applied to the spoiler bellow might be interesting. Surprise message at speed.
Carbon fiber… really anything. I’m surprised at the lack of, what I’d call “show car” parts offered for the 996. Coming from the corvette world, there is a plethora of billet oil, coolant, steering fluid, etc. caps available. While not my cup of tea, 90% of the vettes had them.
Colored carbon fiber emblems and badging may be kinda neat.
I’d also like to see someone develop a tested and proven intake manifold, not just a plenum.
Carbon fiber… really anything. I’m surprised at the lack of, what I’d call “show car” parts offered for the 996. Coming from the corvette world, there is a plethora of billet oil, coolant, steering fluid, etc. caps available. While not my cup of tea, 90% of the vettes had them.
Colored carbon fiber emblems and badging may be kinda neat.
I’d also like to see someone develop a tested and proven intake manifold, not just a plenum.
Last edited by Camarocane; 05-22-2022 at 08:13 PM.
The following users liked this post:
GC996 (05-22-2022)
The following 8 users liked this post by Rennline:
C2-996 (05-27-2022),
Capt. Obvious (05-27-2022),
EVOMMM (05-26-2022),
Fracture (06-03-2022),
GC996 (05-26-2022),
and 3 others liked this post.
#74
Rennlist Member
#75
Drifting
Carbon fiber gauge faces! (speedometer, tach, etc)