losblancos

I’m looking for a tool to help with an RMS replacement as well if anyone has one they’re looking to loan/sell. I’m in Wisconsin.

Gregs04.5

Where in Wisconsin are you? I have one, and am willing to share, especially if somewhat local to me. (Hartford area)

losblancos

PM’d ya

TexSquirrel

Years ago I searched for RMS tools online.
I finally bought 2 from Rennlist members.(1 3D printed and 1 milled Delrin)
@Chris(MA) made the least expensive 3D printed one.
There was a site called cheetahonline.com that I ordered from and never received a response.
I'm not sure if my payment went through or not, it's been way too long ago.
I'd long forgotten about them since I never heard anything from them.
Today, several years later, I received an e-mail from plasmatio.com stating they have taken over cheetahonline.com and found that I had ordered one and it had never been processed.
Of course now I have one made out of aluminum(eBay prices are cheaper than Amazon, just make sure to buy one already in the US) and the Delrin one I bought years ago, so I don't need another one from Plasmatio.
(I recently gave away my 3D printed one in the Pay It Forward thread)
I just took a look at Plasmatio's website and they have some neat stuff.
I thought I'd pass along their site.
I have not ordered from them, so this is not an endorsement.
https://plasmatio.com/collections/au...or-porsche-m96

Mpfaff

Thanks for the heads up.

2006 997.1

Hi All,
Im preparing to replace clutch on my 2006 997 and figured I would replace RMS as well. Found this website https://plasmatio.com/cart that makes a tool for the install. Says it’s 13mm depth and seems to take the guess work out of making one out of PVC. Only $45. Has anyone used this? I live in Belmont MA in case someone wants to rent me the tool . Thanks

mffarrell

No, but I have a cad program to print a tool for a turbo. I am not sure they are the same depth. The turbo is 4mm.