Center console delete custom gauge pod
The following 2 users liked this post by Tom Loder:
EVOMMM (06-13-2022),
redlineblue (06-24-2022)
#21
RL Community Team
Rennlist Member
Rennlist Member
I don't recall from when I installed my console delete, but is there space in there to make a phone holder?
#22
There should be, the rear half has an airbag control module but I think there should be enough empty space forward for a little cubby. The airbag module would make me nervous about putting a drink holder there though.
#23
RL Community Team
Rennlist Member
Rennlist Member
yeah it would be neat to have a phone mount, not necessarily such that the phone is sitting up, but even just a pocket-ish thing I could drop it into would be pretty neat.
#24
Here's how much room is available on the horizontal, had this pic laying around. I'm actually thinking there's not enough room, or at best it would be tilted downward but the phone would be sticking out decently far, phones are really big these days.
The following users liked this post:
TheChunkNorris (06-14-2022)
#26
Rennlist Member
If you have multiple cars that use it, it's better to buy the liter size.
Here are a couple of pics of my test fit.
This is with the new style VDO:
This is a VDO old style;
What might be an issue for some is that I don't see any way to wire it up without trimming some of the console area beneath the gauge (shown as the hatched area).
I'll get some better pics when I have it out of the garage.
Here are a couple of pics of my test fit.
This is with the new style VDO:
This is a VDO old style;
What might be an issue for some is that I don't see any way to wire it up without trimming some of the console area beneath the gauge (shown as the hatched area).
I'll get some better pics when I have it out of the garage.
Last edited by SoCal911t; 06-14-2022 at 02:23 PM.
The following users liked this post:
TheChunkNorris (06-14-2022)
#27
Rennlist Member
You should be able to run a USB cable from a head unit under the delete panel and snake it back to the mount location, but I don’t see any issue with cutting a hole in the console delete. The 996.1 GT3 ClubSport had a kill switch there for the whole car.
#28
Back in stock!
I reinstated 10% off till July 1 - https://www.etsy.com/shop/UsefulPrin...pon=RENNLIST10
I reinstated 10% off till July 1 - https://www.etsy.com/shop/UsefulPrin...pon=RENNLIST10
#29
I bought an 'under dash' single din pocket and was going to use the oem climate surround to do exactly this.
I was going to fit the PCCM+, but then heard mixed reviews on it and didn't proceed.
But it would have sat just under the dash still leaving the console delete feel to the car and the extra leg room.
That guage looks great mate. really great.
#30
I bought an 'under dash' single din pocket and was going to use the oem climate surround to do exactly this.
I was going to fit the PCCM+, but then heard mixed reviews on it and didn't proceed.
But it would have sat just under the dash still leaving the console delete feel to the car and the extra leg room.
That guage looks great mate. really great.
I was going to fit the PCCM+, but then heard mixed reviews on it and didn't proceed.
But it would have sat just under the dash still leaving the console delete feel to the car and the extra leg room.
That guage looks great mate. really great.