Replacement M96 DIY engines under 10k
#91
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Have you checked napa for the hoses.. ?? I've found they carry some continental stuff and others, but its hard ot get them to look it up, you need the stock # ..
some of the stuff I've bought from them that's for a VW or 911, had a OEM box in side the napa box. YMMV
some of the stuff I've bought from them that's for a VW or 911, had a OEM box in side the napa box. YMMV
#92
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Have you checked napa for the hoses.. ?? I've found they carry some continental stuff and others, but its hard ot get them to look it up, you need the stock # ..
some of the stuff I've bought from them that's for a VW or 911, had a OEM box in side the napa box. YMMV
some of the stuff I've bought from them that's for a VW or 911, had a OEM box in side the napa box. YMMV
I have been working on getting the special quick connectors for 3 weeks from Norma, don't now if it will happen or not without buying 1000 at a time. If I can get the connectors, I have a way to make the hoses out of 3/4 .035 wall aluminum tubing. I have a very nice two handle hand tubing bender and some sticks of tubing and other supporting hardware if can get the connectors..I may run out of factory hoses, I don't know how many there are in North Amercia. When I was working at Porsche, it was very common for the parts guy to tell me how many of a part was in the country, sometimes it was none, or just a few....lol.. never was there hundreds of anything except maybe park plugs...lol
#93
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I've usually had to go old school and make them drag the paper catalogs out..
But I do have a major wharehouse near where I live.. i don't get lucky every time
but enough to make it worth it for some bits now and again.
But I do have a major wharehouse near where I live.. i don't get lucky every time
but enough to make it worth it for some bits now and again.
#94
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
These hoses are molded plastic PA12, they fit nothing but a Porsche m96..lol
#96
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
My cylinder head guy (the largest cylinder head service in the state, that I have known for decades) does my 996 heads for $200 bucks each, he has even fixed the crack on mine 12 years ago when I first got it,(still going strong). and has since fixed a half dozen more for people that I commissioned. Some cylinder head shops will insist on new springs, guides, without even checking them to see if the guides are worn, or if the spring pressure is weak. I guess checking spring pressure and checking guide wear doesn't pay as well ..
Your right, my cylinder head guy didn't bat an eye when I brought in the Porsche m96 heads even though he had never seen one, and I showed him the crack I wanted fixed..lol
Your right, my cylinder head guy didn't bat an eye when I brought in the Porsche m96 heads even though he had never seen one, and I showed him the crack I wanted fixed..lol
#97
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
If you looking for port work or more HP go with Len at Hamheads. But if you just want a clean ,well executed, standard head overhaul/ valve job, Johnny is my man..
#98
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Johnny Darabarus, the owner of Cylinder Head Service in Fairfield AL. They do thousands of heads a month.
If you looking for port work or more HP go with Len at Hamheads. But if you just want a clean ,well executed, standard head overhaul/ valve job, Johnny is my man..
If you looking for port work or more HP go with Len at Hamheads. But if you just want a clean ,well executed, standard head overhaul/ valve job, Johnny is my man..
#99
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
awesome..... if we send him the heads will he know if the valves need to be replaced? We are in the process of removing my heads - what does head service for the 996 3.4 usually include and what should we replace on those heads while we have them off... these heads have just over 65,000 miles on them with lots of track time... don't want to miss anything
Since your engine exploded, your heads may not be repairable, if you need heads hit me up. I have a good used set I can get him to rebuild and send to you..
Last edited by Porschetech3; 12-07-2021 at 04:45 PM.
#100
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yes, he will know what to do, he has done nothing but heads for 4 decades..( although only a dozen m96 that I have taken to him).
Since your engine exploded, your heads may not be repairable, if you need heads hit me up. I have a good used set I can get him to rebuild and send to you..
Since your engine exploded, your heads may not be repairable, if you need heads hit me up. I have a good used set I can get him to rebuild and send to you..
#101
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yes, he will know what to do, he has done nothing but heads for 4 decades..( although only a dozen m96 that I have taken to him).
Since your engine exploded, your heads may not be repairable, if you need heads hit me up. I have a good used set I can get him to rebuild and send to you..
Since your engine exploded, your heads may not be repairable, if you need heads hit me up. I have a good used set I can get him to rebuild and send to you..
#102
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks for the kind words my man, just trying to help a brother out while cleaning out the horded Porsche parts I have stored up. Saving my kids from having to deal with it when I'm gone, lol, I'll just leave them a check..