When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I received the plastic slides for the trim pieces last week. I installed them this weekend, along with some new foam pieces. It was a pain to get the trim pieces slid onto the rails, but it's made a world of difference in rattles & noise!
Considereing mine were missing the plastic slides & the PO had tried to silicon & screw them into place!
Here are pics of the slides - I forgot take pics of them installed, but looks just like previous pics in this thread.
One question. How did you install them? The original had a rivet. If you used a rivet, what was the size (height and width)? Same question if you used screws, etc. Also noticed on another posting that people have added a couple additional screws to keep the slide from twisting. Did you do that as well?
I just drilled one hole, either side & installed them with some small, large thread sheet metal screws (approx. 10mm x 4mm). I actually ordered the screws that go with them, but the heads, I felt, were too tall & they would bind on the track. They seemed to be pretty solid, so I did not add screws to stop them from swiveling.
Sorry to wake this old thread...I'm a new member and can't PM yet. I have a 1996 993 Targa; I'm going to attempt to troubleshoot the Targa top myself in my garage. I wonder if your scans for the factory shop manual might still be available?
Edit: I see this posted to the end of this thread. Sorry everyone. I thought it would reply to the post I was on. tagging @BobbyT here whose post I was replying.
Last edited by BrackAttack; 09-30-2020 at 11:22 PM.
Hi -- send an email to : will<dot>burke@mac<dot>com and I can send a link to the manual pages I have that you can download. Need to see about how to post here for posterity.