red67vert

Anyone using the Redline boot with FDM SSK, and Function First ****? Trying to figure out what height boot I need to order from Redline. I think the SSK raises **** around 1/2 inch, and can get another 1/2 from FF **** if set to highest position. So should I get the standard boot, or 1" longer, or some have told me to go 1" shorter, as the redline boot is very generous, in the first place? Any one actually have my set up, with a Redline boot? Thank You!

Vandit

Good question. I need to order a new boot too.

rrc715

I purchased a tan boot but ended up using my stock boot because the color of the leather did not really match plus you still need the mounting frame from the bottom of the original boot. For me it was just easier to remove the **** from the original boot and maintaining the sewn in bracket plus the leather matched perfectly. I have a new tan boot from FF available if you guys are interested.