Who is interested in monoball Gt2/EVO-esque inner tie rods?
#106
Rennlist Member
Thread Starter
^ Pricing is pending but have looked at several references including the original cost of the now NLA factory parts in addition to current RS parts.
Keep in mind that this will be a relatively bespoke low production run and that making the new part involved some R&D re. subtle improvements over the factory version. I have no financial skin in the game but understand what the process has involved.
Keep in mind that this will be a relatively bespoke low production run and that making the new part involved some R&D re. subtle improvements over the factory version. I have no financial skin in the game but understand what the process has involved.
#110
Rennlist Member
Thread Starter
Ok, here is list of RListers that expressed interest. Please confirm.
Ira will chime in with group buy pricing - this is going to be a one time deal that will reflect the Rennlist support that got this project off the ground
45 with stated interest for 47 pairs:
jdistefa
Nlu
Phoneyman
911 F1
Paddy (2 pairs)
993KT
JStyer
Overboosted28
Trophy
Olub8uchkxp
Tosi
Cobalt
Jhg41977
Nyc993
Redlightrich
9MRSCS
Lowflying
Bill Verburg
Jbigelow
Saint-Vieux
Michel M.
Pcarrera993
Ironimages
Uniquenamehere
JPS
Silver Surfer
Mf_rsr
Jeff96-993
Siny993er
Bukowski
Kein_Ersatz
993khto
Jarg1
Spyerx
Orangecurry (2 pairs)
S2k993
Il pirata
Ralfonso
Jay G
Vandit
Bukowski
P906
Jay J
Ipe
Ezinternet
Ira will chime in with group buy pricing - this is going to be a one time deal that will reflect the Rennlist support that got this project off the ground
45 with stated interest for 47 pairs:
jdistefa
Nlu
Phoneyman
911 F1
Paddy (2 pairs)
993KT
JStyer
Overboosted28
Trophy
Olub8uchkxp
Tosi
Cobalt
Jhg41977
Nyc993
Redlightrich
9MRSCS
Lowflying
Bill Verburg
Jbigelow
Saint-Vieux
Michel M.
Pcarrera993
Ironimages
Uniquenamehere
JPS
Silver Surfer
Mf_rsr
Jeff96-993
Siny993er
Bukowski
Kein_Ersatz
993khto
Jarg1
Spyerx
Orangecurry (2 pairs)
S2k993
Il pirata
Ralfonso
Jay G
Vandit
Bukowski
P906
Jay J
Ipe
Ezinternet
Last edited by jdistefa; 04-13-2016 at 08:27 PM.
#112
Rennlist Member
Ok, here is list of RListers that expressed interest. Please confirm.
Ira will chime in with group buy pricing - this is going to be a one time deal that will reflect the Rennlist support that got this project off the ground
32 with stated interest for 33 pairs:
Nlu
Phoneyman
911 F1
Paddy (2 pairs)
993KT
JStyer
Overboosted28
Trophy
Olub8uchkxp
Tosi
Cobalt
Jhg41977
Nyc993
Redlightrich
9MRSCS
Lowflying
Bill Verburg
Jbigelow
Saint-Vieux
Michel M.
Pcarrera993
Ironimages
Uniquenamehere
JPS
Silver Surfer
Mf_rsr
Jeff96-993
Siny993er
Bukowski
Kein_Ersatz
993khto
Ira will chime in with group buy pricing - this is going to be a one time deal that will reflect the Rennlist support that got this project off the ground
32 with stated interest for 33 pairs:
Nlu
Phoneyman
911 F1
Paddy (2 pairs)
993KT
JStyer
Overboosted28
Trophy
Olub8uchkxp
Tosi
Cobalt
Jhg41977
Nyc993
Redlightrich
9MRSCS
Lowflying
Bill Verburg
Jbigelow
Saint-Vieux
Michel M.
Pcarrera993
Ironimages
Uniquenamehere
JPS
Silver Surfer
Mf_rsr
Jeff96-993
Siny993er
Bukowski
Kein_Ersatz
993khto
#113
I have the factory one on my car, it has helped turn in noticeably w/ no down side
the only concern is having replacements available when the time comes.
911 have used a version of these as a steering upgrade since the mid '80's 930 got them.
#115
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thank you for all the interest and for motivating us to get this product going! We are very excited about it as well. We have set the retail price at $145 for each link + shipping, but will be offering a group buy price of $125 as a promotional initial product release, to help get the word out.
Prototype testing is currently being finished up, and the logistics of ordering and shipping a relative large production build of this size is being worked out and finalized. At this point, we could possibly have finished parts ready to ship in as little as 2 weeks, or as long as 8 weeks. It will hopefully be closer to 2 weeks, but it’s difficult to positively pin it down better until everything is worked out. I’m trying to be careful not to mislead anyone here, and don’t want set expectations that we might not meet for unforeseen reasons.
Please hold off on calling in or emailing to place orders until we are fully prepared. I will be setting up a page on our site for the group buy preorders, and will post a link here on this thread. We’ll also be offering a full EVO front upright kit, which will include the uprights, new bearings, bump steer adjustable outer tier rods, and the new RSR style inner tie rods. Please feel free to email or post any questions in the meantime, I will be happy to reply as best I can. Thanks again!
Ira
Prototype testing is currently being finished up, and the logistics of ordering and shipping a relative large production build of this size is being worked out and finalized. At this point, we could possibly have finished parts ready to ship in as little as 2 weeks, or as long as 8 weeks. It will hopefully be closer to 2 weeks, but it’s difficult to positively pin it down better until everything is worked out. I’m trying to be careful not to mislead anyone here, and don’t want set expectations that we might not meet for unforeseen reasons.
Please hold off on calling in or emailing to place orders until we are fully prepared. I will be setting up a page on our site for the group buy preorders, and will post a link here on this thread. We’ll also be offering a full EVO front upright kit, which will include the uprights, new bearings, bump steer adjustable outer tier rods, and the new RSR style inner tie rods. Please feel free to email or post any questions in the meantime, I will be happy to reply as best I can. Thanks again!
Ira
__________________
www.Tarett.com | Sales@Tarett.com | 858.674.5573
Check out our new Suspension Package Designer
www.Tarett.com | Sales@Tarett.com | 858.674.5573
Check out our new Suspension Package Designer
#119
Rennlist Member
Thank you for all the interest and for motivating us to get this product going! We are very excited about it as well. We have set the retail price at $145 for each link + shipping, but will be offering a group buy price of $125 as a promotional initial product release, to help get the word out.
Ira
Ira
#120
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Yes, it's a joint effort with ERP. Cary is a very talented suspension designer, and great to work with. I came up with the a design, but Cary had the idea and resources to do an close copy of the OEM part, so we went that route. It took a lot longer to do it that way, but I it think it was well worth it.
Ira
Ira