ilko

In my quest for a proper rear spoiler conversion I've discovered that the following items are missing from my car:

- Switch on the center console - I'd be happy to send you the dummy that is there now + cash in exchange for yours.
- Module under the glove box
- Wiring harness under the deck lid - that one is integrated with the deck lid light wire which is present on my car, so I can send you mine + cash in exchange for yours.

If anybody has these parts laying around can you please let me know by posting on this thread or via a PM?

Thank you so much!

Flying Finn

Hey there, glad to see you back with 993.

Let me check for all that you need, IIRC I sold the old wing & motor but should have the rest somewhere (it's been almost a decade...). I'll get back to you.

ilko

Thank you Finn!

Bill Verburg

I'm pretty(99.9%) sure that I have all that stuff, I'll start looking

ilko

Thank you Bill! Are you going to the Vintage Festival at Lime Rock this weekend by any chance?

Mark Harris

ilko,

We may be able to help each other out. Are you looking for the harness that has the wiring for the 3rd brake light (towel bar) found on a convertible, targa or 95'?

And do you have in exchange the one that does not have that extra wiring? I.E. one from a car with a high rear glass 3rd brake light.

If this is correct I will just swap you. I bought one off a parts car and it has the 3rd brake light pig tail which I don't need. My original was cut for a fixed wing and I want an uncut original (sans the pig tail for the lower 3rd brake light).

Thanks..

jmg3

.....

ilko

Mark, my car doesn't have the 3rd brake light in the harness, it's a 96.

My harness is uncut, but doesn't have the plugs for the rear spoiler. It only has 2 wires for the deck lid light.

Mark Harris

Understood. My bad. I was confusing the (inside compartment) deck light with the 3rd brake light. We tried.

ilko

Sounds like a package with the needed parts is coming to me from a yellow lab owner in Cheshire. All thanks to a certain West Coast air-cooled aficionado with a 993 disease and no desire for a cure. Thank you to all involved in this complicated and wonderful transaction!

Bill Verburg

So you're all set?

I found the controller, and a cut harness, I Know that i also have an uncut one in one of the boxes, but I'll stop looking.

Foxman

I have the module and ordered the switch, but the wiring harness under the decklid is missing. Does anyone have a wiring harness that they'd like to sell?

E30M3

Jim,

I have what you are looking for..

PM me or Email me if you still have my info..

Foxman

Thanks Fred, Emailed you!

Jim

Foxman

The harness is in the mail. A big thanks to E30M3. What a great Forum!