VALENTINE1 EXCELLENT CUSTOMER SERVICE
#31
Race Director
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I've had a V1 for many years and I do feel naked without it. I just switched the mounting point from below the mirror to above and have noticed no decrease in signal strength from my known bogeys.
I finally figured out that if I put the suction cups completely in the black stuff they will hold (2+ weeks now...).
Hope this helps!
Boris
I finally figured out that if I put the suction cups completely in the black stuff they will hold (2+ weeks now...).
Hope this helps!
Boris
#32
Official Wednesday AM Red Bull F1 test driver
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The upgrade deal is great- I got one when they first came out and with the upgrade option, seem to get a new one every few years. Nice that the original wiring I leave in all the cars will work with all of them. I especially like the remote so the main unit never lights up, avoiding those idiots that will follow you when they see the lights.
#33
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
To mount the suction cups on the black dots, place vasoline in the suction cups.
Mounting higher gives you better radar reception due to less obstructions between radar source and radar detector.
Mounting higher gives you better radar reception due to less obstructions between radar source and radar detector.
#34
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I've always thought using the suction cups was potentially dangerous (either in an accident or just having the detector fall off every few weeks) and in some states it is now illegal to have anything mounted to the windshield. Some time ago I posted a DIY in the forum to make a mount that would be held by the visor screws (sorry doesn't work for cabs unless you don't need the interior light) - it is mounted high and is very inconspicuous. I also highly recommend using a remote mute button mounted on the turnsignal stock...these can be purchased on eBay for ~$10.
There is also an aluminum mount called Blendmount IIRC that attaches to your rearview mirror. The detector hangs below the mirror though so it's not very stealthy, but the controls are more reachable if you don't use the remote display and it is very sturdy.
There is also an aluminum mount called Blendmount IIRC that attaches to your rearview mirror. The detector hangs below the mirror though so it's not very stealthy, but the controls are more reachable if you don't use the remote display and it is very sturdy.
#35
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I am also a long time owner of V1. I even have two of them. I have had them upgraded (which is really turning in an old V1 and you get a brand new V1) too.
If you want to save a few bucks, you can put yourself on Valentine's list for returned V1s (a few come back every so often based on their 30 day no questions asked return policy) and save 10%. You will not be able to tell that it was even opened.
And mounting higher is better. Better vantage point for getting the signal. And the rear signal works just fine when mounted above the rear view mirror.
Mark
If you want to save a few bucks, you can put yourself on Valentine's list for returned V1s (a few come back every so often based on their 30 day no questions asked return policy) and save 10%. You will not be able to tell that it was even opened.
And mounting higher is better. Better vantage point for getting the signal. And the rear signal works just fine when mounted above the rear view mirror.
Mark
#36
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
...I posted a DIY in the forum to make a mount that would be held by the visor screws (sorry doesn't work for cabs unless you don't need the interior light) - it is mounted high and is very inconspicuous. I also highly recommend using a remote mute button mounted on the turnsignal stock...
![](http://i454.photobucket.com/albums/qq264/DavidinHK/Valentine%20One%20mount/IMG_0736.jpg)
![](http://i454.photobucket.com/albums/qq264/DavidinHK/Valentine%20One%20mount/IMG_0735.jpg)
#37
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I like that. Are these legal in CA? I may need to get one.
#38
Instructor
Join Date: Jul 2010
Location: Alpharetta (Atlanta), GA
Posts: 226
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
$189+ shipping for the upgrade?? Seems a bit steep for the benefits listed for mine:
Our V1.85 Upgrade* for this series of V1 will produce the following benefits:
Crystal-controlled Frequency Tuning to permanently safeguard coverage at radar-band edges.
Traffic Monitor Filter to eliminate K-band false alarms caused by the SpeedInfo, a traffic-flow monitoring system that sends frequent K-band radar bursts into the traffic stream. This software algorithm is installed at the factory but not activated. For activation instructions, click here.
Extended Serial Protocol (ESP) enhances two-way communication with future peripheral devices (details to be announced).
Euro Mode: You will enjoy longer radar range and fewer false alarms in Europe and some other countries outside the U.S. Euro Mode adapts V1's radar sensitivity to the way they use radar for photo enforcement. It narrows and intensifies radar coverage to K and the sections of Ka bands applied there to photo radar. X band is not covered in Euro Mode. (V1 is already optimized for North American radar as it comes from the factory. Euro Mode is not appropriate for driving here).
This upgrade will install the Euro Mode but you must activate it. To activate, see http://www.valentine1.com/Lab/TechReport3.asp
* One-year limited warranty starting at upgrade date, same as new units.
-- Upgrade to V1.85: As soon as we receive your old unit (in operable condition with no tampering of the serial number) we'll replace two circuit boards and install revised firmware, then return it to you in the shortest possible time with a new serial number to indicate its revised capability.
PRICE: $189 plus shipping
Our V1.85 Upgrade* for this series of V1 will produce the following benefits:
Crystal-controlled Frequency Tuning to permanently safeguard coverage at radar-band edges.
Traffic Monitor Filter to eliminate K-band false alarms caused by the SpeedInfo, a traffic-flow monitoring system that sends frequent K-band radar bursts into the traffic stream. This software algorithm is installed at the factory but not activated. For activation instructions, click here.
Extended Serial Protocol (ESP) enhances two-way communication with future peripheral devices (details to be announced).
Euro Mode: You will enjoy longer radar range and fewer false alarms in Europe and some other countries outside the U.S. Euro Mode adapts V1's radar sensitivity to the way they use radar for photo enforcement. It narrows and intensifies radar coverage to K and the sections of Ka bands applied there to photo radar. X band is not covered in Euro Mode. (V1 is already optimized for North American radar as it comes from the factory. Euro Mode is not appropriate for driving here).
This upgrade will install the Euro Mode but you must activate it. To activate, see http://www.valentine1.com/Lab/TechReport3.asp
* One-year limited warranty starting at upgrade date, same as new units.
-- Upgrade to V1.85: As soon as we receive your old unit (in operable condition with no tampering of the serial number) we'll replace two circuit boards and install revised firmware, then return it to you in the shortest possible time with a new serial number to indicate its revised capability.
PRICE: $189 plus shipping
#41
button queen
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
$189+ shipping for the upgrade?? Seems a bit steep for the benefits listed for mine:
Our V1.85 Upgrade* for this series of V1 will produce the following benefits:
Crystal-controlled Frequency Tuning to permanently safeguard coverage at radar-band edges.
Traffic Monitor Filter to eliminate K-band false alarms caused by the SpeedInfo, a traffic-flow monitoring system that sends frequent K-band radar bursts into the traffic stream. This software algorithm is installed at the factory but not activated. For activation instructions, click here.
Extended Serial Protocol (ESP) enhances two-way communication with future peripheral devices (details to be announced).
Euro Mode: You will enjoy longer radar range and fewer false alarms in Europe and some other countries outside the U.S. Euro Mode adapts V1's radar sensitivity to the way they use radar for photo enforcement. It narrows and intensifies radar coverage to K and the sections of Ka bands applied there to photo radar. X band is not covered in Euro Mode. (V1 is already optimized for North American radar as it comes from the factory. Euro Mode is not appropriate for driving here).
This upgrade will install the Euro Mode but you must activate it. To activate, see http://www.valentine1.com/Lab/TechReport3.asp
* One-year limited warranty starting at upgrade date, same as new units.
-- Upgrade to V1.85: As soon as we receive your old unit (in operable condition with no tampering of the serial number) we'll replace two circuit boards and install revised firmware, then return it to you in the shortest possible time with a new serial number to indicate its revised capability.
PRICE: $189 plus shipping
Our V1.85 Upgrade* for this series of V1 will produce the following benefits:
Crystal-controlled Frequency Tuning to permanently safeguard coverage at radar-band edges.
Traffic Monitor Filter to eliminate K-band false alarms caused by the SpeedInfo, a traffic-flow monitoring system that sends frequent K-band radar bursts into the traffic stream. This software algorithm is installed at the factory but not activated. For activation instructions, click here.
Extended Serial Protocol (ESP) enhances two-way communication with future peripheral devices (details to be announced).
Euro Mode: You will enjoy longer radar range and fewer false alarms in Europe and some other countries outside the U.S. Euro Mode adapts V1's radar sensitivity to the way they use radar for photo enforcement. It narrows and intensifies radar coverage to K and the sections of Ka bands applied there to photo radar. X band is not covered in Euro Mode. (V1 is already optimized for North American radar as it comes from the factory. Euro Mode is not appropriate for driving here).
This upgrade will install the Euro Mode but you must activate it. To activate, see http://www.valentine1.com/Lab/TechReport3.asp
* One-year limited warranty starting at upgrade date, same as new units.
-- Upgrade to V1.85: As soon as we receive your old unit (in operable condition with no tampering of the serial number) we'll replace two circuit boards and install revised firmware, then return it to you in the shortest possible time with a new serial number to indicate its revised capability.
PRICE: $189 plus shipping
As for my V1 it's great. We drove from southwest Ohio to Phoenix, and found every bogey. The only real threat was an X Band trooper in New Mexico.
So I love the V1 and will tolerate the false alarms just to have the security of the K Band active--there are a lot of them out there.
#42
Instructor
Join Date: Jul 2010
Location: Alpharetta (Atlanta), GA
Posts: 226
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I bought my V1 around 2004 if I'm not mistaken so it's ~7 years old. I have a K40 laser difuser as well.
At $189 and the roads I travel here in Atlanta aren't flooded with the traffic monitors yet means I'm in no rush to upgrade at this time. Almost worth using this one in another car and buying a brand new one for the DD (Cayenne).
At $189 and the roads I travel here in Atlanta aren't flooded with the traffic monitors yet means I'm in no rush to upgrade at this time. Almost worth using this one in another car and buying a brand new one for the DD (Cayenne).
#44
Rennlist Member
#45
Instructor
Join Date: Jul 2010
Location: Alpharetta (Atlanta), GA
Posts: 226
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I hate to agree - It did save me on several laser occasions in the past but they become out of date waaaaay too fast and they do not seem to update their products like Valentine. They try to sell you a new version that will also be out of date in a few months so they try to add in a support pkg for upgrades. big scam.