When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Old thread I know but dc21 are great. After there rebuild engine idles great and really comes alive when the cams kick in. Does anybody know the profile of dc21 cam?
Bringing this one back from the dead. What’s the preferred Cam these days and supporting mods for a street driven 993?
I running these cams with Rennsport Tune, LWFW, and Fister IIIs. Sounds great on idle with a nice exhaust lope. My car now pulls strong and consistent anywhere above 2.5k rpm.
I running these cams with Rennsport Tune, LWFW, and Fister IIIs. Sounds great on idle with a nice exhaust lope. My car now pulls strong and consistent anywhere above 2.5k rpm.
nice. How’d you decide on this profile vs the others they offer? Is this more or less aggressive?
also, how does it compare to oem RS and the DC21 mentioned in this post?
Those web cams look the same as the DC21’s at .050
The DC21’s came about by combining RS intake profile with GT2 exhaust profile. It’s a nice performance bump over RS without being dramatic. I would run slightly wider LSA with VRAM and narrow with standard intake. Discuss with John at Dougherty cams.
Talk to the folks at WebCam and ask if those use factory lobe profiles or something custom. If custom they have the potential to be a BIG improvement over DC21’s by having more area under the curve. Ask for specs at .010, .050, .100, .200, .300 and .400. I also REALLY like the hard welding process over blank billets.
04-16-2014, 10:54 AM
