A few air-cooled sundials
#1
Seared
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Here are a few of my clocks that I completed over the last couple of months, but neglected to post.
(1) The first one is a fan clock that went to CHRIS WU:
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Chris1.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Chris2.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Chris3.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Chris4.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Chris5.jpg)
Thank you, Chris!
(2) This one went to 'rph60'. Robert asked for something different, and allowed me to go where I wanted with the design. I shortened a 993 rear control arm, created a steel cradle for it to attach to the fan, and drilled & tapped the end of the arm in order to fasten it to the base plate:
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich1.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich2.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich3.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich4.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich5.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich6.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich7.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich8.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich9.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich10.jpg)
Thank you, Robert!
(3) This clock was originally sold to Edgy01, four years ago. Dan recently sent it back and asked me to create a new housing, using Amboyna Burl. Dan told me to do whatever I pleased with the old housing...
That's where cabrio993 came into the picture. Sergio already had a spare clock mechanism, and wanted to do his own soldering, etc. Unfortunately, Dan's old clock housing sustained some damage in transit, so Sergio and I agreed that I'd repair and somewhat modernize the housing before sending it off. I also decided to create a new back for the housing using aluminum plate.
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Sergio1.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Sergio2.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Sergio3.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Sergio4.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Sergio5.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Sergio6.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Sergio7.jpg)
Thank you Sergio!
(Disclaimer for the moderators who recently contacted me: These were all completed on a one-off, request basis. I do not create these, and then offer them for sale.)
Andreas
(1) The first one is a fan clock that went to CHRIS WU:
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Chris1.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Chris2.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Chris3.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Chris4.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Chris5.jpg)
Thank you, Chris!
(2) This one went to 'rph60'. Robert asked for something different, and allowed me to go where I wanted with the design. I shortened a 993 rear control arm, created a steel cradle for it to attach to the fan, and drilled & tapped the end of the arm in order to fasten it to the base plate:
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich1.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich2.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich3.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich4.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich5.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich6.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich7.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich8.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich9.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Rich10.jpg)
Thank you, Robert!
(3) This clock was originally sold to Edgy01, four years ago. Dan recently sent it back and asked me to create a new housing, using Amboyna Burl. Dan told me to do whatever I pleased with the old housing...
That's where cabrio993 came into the picture. Sergio already had a spare clock mechanism, and wanted to do his own soldering, etc. Unfortunately, Dan's old clock housing sustained some damage in transit, so Sergio and I agreed that I'd repair and somewhat modernize the housing before sending it off. I also decided to create a new back for the housing using aluminum plate.
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Sergio1.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Sergio2.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Sergio3.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Sergio4.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Sergio5.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Sergio6.jpg)
![](http://img.photobucket.com/albums/v452/aowalter/AOWdesign/Sergio7.jpg)
Thank you Sergio!
(Disclaimer for the moderators who recently contacted me: These were all completed on a one-off, request basis. I do not create these, and then offer them for sale.)
Andreas
Last edited by AOW162435; 07-29-2010 at 10:32 PM.
#6
King of Cool
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I really like the control arm stand, very nice.
Hmmm... I have one extra control arm and rear subframe laying around which I've been thinking of doing something like this.
Hmmm... I have one extra control arm and rear subframe laying around which I've been thinking of doing something like this.
#7
Race Car
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks to Edgy for allowing good ol' #0020 to live on, and Andreas for bring it back to live!
The new aluminum back and detachable power supply on the original AOWDesign clocks are a great plus and complement the design nicely.
I'll post pictures of #0020 once I get it all put together.
The new aluminum back and detachable power supply on the original AOWDesign clocks are a great plus and complement the design nicely.
I'll post pictures of #0020 once I get it all put together.
Trending Topics
#12
Seared
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Thank you, Sir.
Thank you, SoapSac.
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Thanks to Edgy for allowing good ol' #0020 to live on, and Andreas for bring it back to live!
The new aluminum back and detachable power supply on the original AOWDesign clocks are a great plus and complement the design nicely.
I'll post pictures of #0020 once I get it all put together.
The new aluminum back and detachable power supply on the original AOWDesign clocks are a great plus and complement the design nicely.
I'll post pictures of #0020 once I get it all put together.
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
![](http://w6rec.com/duane/bmw/petcock/bmw_motorcycle_karcoma_petcock1.jpg)
Thank you!
Andreas
#15
Why do I feel so left out!
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
AOW,
Yet more examples of fine workmanship - as I alway say...
Mad Skillz.....
PM incoming.
Simon.
Yet more examples of fine workmanship - as I alway say...
Mad Skillz.....
PM incoming.
Simon.