Any interest in a mid rise lift Group Buy...there must be 5 or so of us on the fence!
#46
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Jun 2001
Location: Lat: 47 Deg 26.848N Lon: 122 Deg 21.341W Seattle
Posts: 2,021
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
So I have had the lift for a couple of weeks and got it all set up and running.
It is very easy to extend the arms out and lift the cars up by the jack pads. Even with the 4100 lb SL on it it doesn't seem to strain lifting...
Access underneath is good and I have a creeper-chair to sit on and slide around.
I have not noticed an issue with the lowest lock position being at 2 feet yet...dunno if that will be a problem.
Here are some pics of the dirty SL:
![](http://forums.rennlist.com/upload/sl_on_lift.jpg)
Here is a close up of the lift:
![](http://forums.rennlist.com/upload/lift_close_up.jpg)
The lift is not at it's highest point; I just wanted the wheels at working height:
![](http://forums.rennlist.com/upload/lift_and_garage.jpg)
And an end view...my doors are larger than normal but not that big!
![](http://forums.rennlist.com/upload/end_shot_sl_on_lift.jpg)
Post up any questions!
Cheers!
It is very easy to extend the arms out and lift the cars up by the jack pads. Even with the 4100 lb SL on it it doesn't seem to strain lifting...
Access underneath is good and I have a creeper-chair to sit on and slide around.
I have not noticed an issue with the lowest lock position being at 2 feet yet...dunno if that will be a problem.
Here are some pics of the dirty SL:
![](http://forums.rennlist.com/upload/sl_on_lift.jpg)
Here is a close up of the lift:
![](http://forums.rennlist.com/upload/lift_close_up.jpg)
The lift is not at it's highest point; I just wanted the wheels at working height:
![](http://forums.rennlist.com/upload/lift_and_garage.jpg)
And an end view...my doors are larger than normal but not that big!
![](http://forums.rennlist.com/upload/end_shot_sl_on_lift.jpg)
Post up any questions!
Cheers!
#48
Rennlist Member
Join Date: Aug 2005
Location: I should be in TNT for Carnival!
Posts: 10,151
Received 289 Likes
on
236 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Anyone have any experience with this:
http://www.maxjaxusa.com/
Seems like a nice DIY option for limited ceiling height......
http://www.maxjaxusa.com/
Seems like a nice DIY option for limited ceiling height......
#49
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Jun 2001
Location: Lat: 47 Deg 26.848N Lon: 122 Deg 21.341W Seattle
Posts: 2,021
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
What about stability, especially side-to-side?
Also, is it going to line up correctly on our 993 lift points?
Also, is it going to line up correctly on our 993 lift points?
I have not had the 993 up yet but lots of guys here have the mid rise lifts and lift the 911 chassis without problems.
Cheers!