Final Ride Height
11-22-2007, 11:11 PM
#1
Three Wheelin'
Thread Starter
Join Date: May 2004
Location: SH, NJ
Posts: 1,317
Likes: 0
Received 0 Likes
on
0 Posts
Final Ride Height
I posted a picture previoulsy after I installed my MO30 that still had a SUV height. So I lowered it bit more, what you guys/gals think of the final ride height... 
11-22-2007, 11:23 PM
#2
Drifting
IMO LOWER LOWER..
But since you're in NJ you need some clearance for the roads.
It looks good though
But since you're in NJ you need some clearance for the roads.
It looks good though
11-22-2007, 11:55 PM
#5
Drifting
Angles can really play with how it looks..
Good improvement BTW
Good improvement BTW
Trending Topics
11-23-2007, 12:27 AM
#8
Racer
Join Date: Mar 2007
Location: Sammamish, WA
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
Well, I think it looks perfect. Not everyone goes for the ultra lowrider look. I really need to do this to mine, it looks so much better than the stock setup. But as I will probably add new wheels/tires at the same time, ill need to keep this in mind as well.
BTW, is there a wheel/tire size & suspension drop simulator somewhere online?
BTW, is there a wheel/tire size & suspension drop simulator somewhere online?
11-23-2007, 04:06 AM
#11
Rennlist Member
If you're happy with it, leave it alone. Personally, I think you've got to go lower. Looks to me like 5mm above RoW M030.
I do agree with Jim that the butt seems high in relation to the front.
I do agree with Jim that the butt seems high in relation to the front.
11-23-2007, 08:33 AM
#12
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Join Date: May 2005
Location: Dayton Ohio.....Americas Playground!!!
Posts: 2,892
Likes: 0
Received 29 Likes
on
18 Posts
It still looks a bit too tall. Here is a pic of my midnignt blue at RS+10mm.
Oops, I guess I could have just said to look at the pic to the left....
Oops, I guess I could have just said to look at the pic to the left....
11-23-2007, 11:45 AM
#15
Three Wheelin'
Thread Starter
Join Date: May 2004
Location: SH, NJ
Posts: 1,317
Likes: 0
Received 0 Likes
on
0 Posts
Tks all for taking the time with the input. I tend to agree to go lower, but I dont want to risk going too low and grind the fenders.. it only has about 1 inch of clearence between the outside of the tire and the fender lip. I think I will have to experience someone elses Pcar that is lowered to the max before I attempt this "lowering" project one more time. CarreraX your car looks great!