identify this part

Reply Subscribe

Thread Tools

Search this Thread

Apr 16, 2007 | 09:30 PM

avidtest

Thread Starter

Racer

Joined: Feb 2007

Posts: 483

Likes: 2

From: Palomar MTN, CA

identify this part

Well, I'm in process of doing my 60K. Oil/filters change and tranny fluid change went well. However, as I was getting ready to do the plugs on the right hand side a part fell out. It came out as I removed the shroud, snorkel tube and clutch ventilation tube. Unfortunately, the part is tweaked right on the last few digits of the model number. I can make out most of the first few digits which seem to be: 993-113-25xxxxxx.

Here are a couple of pics. And it looks like it originally may not have had the big hole in the middle, or at least not as big as it's a bit blown-out/rotted. Any ideas?

Apr 16, 2007 | 09:44 PM

BS911

Addict
Rennlist Member

Joined: May 2001

Posts: 828

Likes: 23

From: Williamsport, MD

I'm gonna guess check valve... 993 113 250 03 - Well, at least half of it that broke off when rotted/rusted. Do I get extra credit if I guess it before the pics go up?

Apr 16, 2007 | 09:46 PM

avidtest

Thread Starter

Racer

Joined: Feb 2007

Posts: 483

Likes: 2

From: Palomar MTN, CA

Ooops. Here's a link to the photo: http://forums.rennlist.com/upload/new_part2.jpg.jpg

Apr 16, 2007 | 10:16 PM

black ice

Three Wheelin'

Joined: Oct 2006

Posts: 1,394

Likes: 3

From: Tampa, FL

Spleen?

Apr 16, 2007 | 10:50 PM

chris walrod

Guru
Lifetime Rennlist
Member

Rennlist Small
Business Sponsor

Joined: Aug 2001

Posts: 15,751

Likes: 104

From: yorba linda, ca

That is the SAI check valve

Apr 16, 2007 | 11:42 PM

avidtest

Thread Starter

Racer

Joined: Feb 2007

Posts: 483

Likes: 2

From: Palomar MTN, CA

Thanks mucho Chris. Based on how different it looks from the complete SAI valve, I would've never figured it out.

OK, now to figure out how much of a pain in the A replacing is going to be.

Apr 17, 2007 | 12:15 AM

avidtest

Thread Starter

Racer

Joined: Feb 2007

Posts: 483

Likes: 2

From: Palomar MTN, CA

Allright! Just went out to check the SAI valve to see what was in store for me and the thing is like new. All bright and shiny. I guess the piece that fell out must've been a remnant from the old one when it was replaced by the previous owner. After wrestling w/ the 60K the last day and a half, that just made my night. :-)