OBDI circuit board group buy - ROUND 2
#93
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'm using TinyCAD for the schematic and FreePCB for the layout. I had to teach myself both programs in the past week. FreePCB comes with a nice manual. I looked at Eagle but didn't find much help documentation so decided against it although I imagine it is more powerful than FreePCB. Then I also learned how your pins are numbered in the schematic program must also match how the packages or "footprints" are numbered in the layout program. I had the transistors wired wrong in my first pass because of this issue. Thank goodness I had your schematic files and layout layers so I confirm everything was working right. Made for a nice tutorial exercise.
#94
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
HI GUYS
IS THE ORDER STILL OPEN,
I WOULD LIKE TO ORDER (1) TO READ THE CODE
IN FT. LAUDERDALE.... AUTOZONE ... READS THE CODES FOR FREE
I DID MINE THIS MORNING
THANKS
CROME
FT.LAUDERDALE FLORIDA
IS THE ORDER STILL OPEN,
I WOULD LIKE TO ORDER (1) TO READ THE CODE
IN FT. LAUDERDALE.... AUTOZONE ... READS THE CODES FOR FREE
I DID MINE THIS MORNING
THANKS
CROME
FT.LAUDERDALE FLORIDA
#95
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
CROME,
If Autozone can read your troublecodes that means you probably have a 1996 or later 993. The ODB reader I am working on is for 1995 models. In 1996, the 993 went to the OBDII system which was government mandated so that a common interface could read the troublecodes for every vehicle manufacturer. You should be able to buy a generic OBDII reader to read the codes off you car. I am sure a search on the forum will highlight which ones Rennlisters recommend for 1996 or later 993s.
If Autozone can read your troublecodes that means you probably have a 1996 or later 993. The ODB reader I am working on is for 1995 models. In 1996, the 993 went to the OBDII system which was government mandated so that a common interface could read the troublecodes for every vehicle manufacturer. You should be able to buy a generic OBDII reader to read the codes off you car. I am sure a search on the forum will highlight which ones Rennlisters recommend for 1996 or later 993s.
Last edited by RicardoD; 07-03-2007 at 11:17 PM.
#96
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
HI
Thanhs for LETTING ME KNOW,yes it's a ...1996 / C4
I received my ...BRIDGE WING ...today...perfect fit
MASHAW sure know their fiberglass aero spoilers, I will recomend
SHAW for porsche stuff.....fast service also
also getting the lowering ...SPRINGS
CROME
FT.LAUDERDALE, FLORIDA
Thanhs for LETTING ME KNOW,yes it's a ...1996 / C4
I received my ...BRIDGE WING ...today...perfect fit
MASHAW sure know their fiberglass aero spoilers, I will recomend
SHAW for porsche stuff.....fast service also
also getting the lowering ...SPRINGS
CROME
FT.LAUDERDALE, FLORIDA
#99
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Billa77,
Group buy information for a completely assembled scantool interface has been posted here on the 964 forum:
https://rennlist.com/forums/964-forum/367516-obd1-scantool-interface-group-buy-fully-assembled.html
Group buy information for a completely assembled scantool interface has been posted here on the 964 forum:
https://rennlist.com/forums/964-forum/367516-obd1-scantool-interface-group-buy-fully-assembled.html
#101
4th Gear
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Dear Ricardo: Do you still offer this great OBD 1 Diag Tool for my porsche 993 1995? If so, could you please tell me how to get it fully assembly? I hava a paypal account.
Thanks in advance
Thanks in advance
![bowdown](https://rennlist.com/forums/graemlins/bowdown.gif)
#104
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hey,
I built one but does not seem to want to talk to the USB Serial adaptor, so I am sure I made some mistake.
I was trying to find the Gerber files so I could try and get one lazer etched.
Alex
I built one but does not seem to want to talk to the USB Serial adaptor, so I am sure I made some mistake.
I was trying to find the Gerber files so I could try and get one lazer etched.
Alex