RSCS Clone Transformation In Progress
#17
Drifting
Thread Starter
Tony, the floor was done in a 2-step epoxy. Its actually over 1/4" thick with vinyl chips mixed in. Had it done by a local company : http://www.garagedesignworks.com/
#24
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Join Date: Oct 2005
Location: On Rennlist, apparently
Posts: 4,447
Likes: 0
Received 37 Likes
on
18 Posts
Lovely inspiratation car
Originally Posted by AC993C2S
Fingerprints are history for sure...who needs 'em anyway!
I would suspect that in about 5 weeks this should be cosmetically finished, if not sooner. It depends on how fast parts arrive that were ordered.
The inspiration for this project is the picture below. The car should look exactly like this one very soon, minus the cheesy windshield lettering (IMHO) and the fog light brake ducts--Im going with the brake ducts alone (without fog lights) that will be completely functional.
I would suspect that in about 5 weeks this should be cosmetically finished, if not sooner. It depends on how fast parts arrive that were ordered.
The inspiration for this project is the picture below. The car should look exactly like this one very soon, minus the cheesy windshield lettering (IMHO) and the fog light brake ducts--Im going with the brake ducts alone (without fog lights) that will be completely functional.
#29
Addict
Rennlist Lifetime Member
Rennlist Lifetime Member
Great project...it will be fun to watch this. I've always liked this tail but have managed to have someone walk me out of it every time I really get tempted to put it on my C2S. I'm not sure how it would look on a wide body.
#30
Drifting
Thread Starter
Thats a tough call Rick. A RSCS tail on a widebody may look odd, or it just may the "mental barrier" that it isn't supposed to be on the car...?